Announcement

Collapse
No announcement yet.

Tightening the Strut

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Ended up grinding the sumbitch off. Damn thing wouldn’t budge! Now I need to tighten the thing up 🥺
    .....bro....

    Comment


    • #17
      Finally got another adult to help me tighten up the Fox struts on this 95. Y’all think this is enough?passenger side driver side
      .....bro....

      Comment


      • #18
        Why is it spinning when you have a slot in the top to hold it?

        Sent from my SM-N950U using Tapatalk
        2015 F250 Platinum

        Comment


        • #19
          Originally posted by fordracing19 View Post
          Why is it spinning when you have a slot in the top to hold it?

          Sent from my SM-N950U using Tapatalk
          It was spinning when I hit it with an impact but I held it with a flat head and had another person tighten it up with a crescent wrench, this time.
          .....bro....

          Comment


          • #20
            Well, I got both sides screwed on about 3-4 threads down. I didn’t if that was sufficient but KYB said as long as their torqued down to 50ft/lb, they should be good. I tightened them down as much as I could. Probably way more than 50 ft/lb
            .....bro....

            Comment


            • #21
              Originally posted by jw33 View Post
              An impact will run it down.
              x2 That's what I have used a few times.

              Comment

              Working...
              X