DFW Mustangs    

Go Back   DFW Mustangs > General > Pirate 4x4 ARRRRRR

Reply
 
Thread Tools Display Modes
Old 06-27-2017, 09:27 PM   #41
kingjason
Notorious PIG
 
Join Date: Jul 2003
Location: Down South
Posts: 7,288
Default

Note to self, remove the hood, and transmission and take another stab at it. I had it in and close but to get the right angle I had the chain to far forward and ran out of length and then out of daylight! The worst part was getting this back in the garage. My ken-tool giant tire iron assisted it back over the humps. Almost a two man job! Room wise I was looking good. Maybe another day.

__________________
Whos your Daddy?
kingjason is offline   Reply With Quote
Old 06-28-2017, 08:21 PM   #42
kingjason
Notorious PIG
 
Join Date: Jul 2003
Location: Down South
Posts: 7,288
Default

Almost like Novak has done a few of these. Looks like it will be dead on where the bolt is on the shock mount and my radiator should fit perfect. Pan even clears the pinion brake.I do plan on putting a F body *oil pan on it which will free up 4 inches also. I bought this cart specifically for installing transmissions and transfer cases and it works like a champ.Funny thing is, I may be able to flip the old cross member*and the trans holes may be right on top of it. Drill, add rubber and bolt away. Crossing my fingers on that one.













__________________
Whos your Daddy?
kingjason is offline   Reply With Quote
Old 07-27-2017, 08:11 PM   #43
kingjason
Notorious PIG
 
Join Date: Jul 2003
Location: Down South
Posts: 7,288
Default

Ever have something figured out in your mind that is just not really going to pan out exactly how you planned it. I thought I ordered a floor mount cable Lokar. Apparently, I did not. The JB triple stick I can't decide if I want in the floor or all that sexy aluminum on top. I did buy the flush mount set up but need 4 inches underneath which I think I have six or so. I think if I bury the JB in the square, set the handles up with a tad of lean back, and drop the tranny shifter directly behind it I will be good. Might be a tad long but it will work. May just end up swapping the Lokar shifter to cable and putting the Lokar by the dash and the triple stick right behind it, like originally planned I think. The good news is I did get enough cable to move those JB's around a little.

Also, can you guys see my pics. I know I paid like a dollar to lose the advertisements a year ago, and it was for life. Just wondering if maybe I got lucky on the PB rip off. Or maybe I can just see them.

__________________
Whos your Daddy?
kingjason is offline   Reply With Quote
Old 07-28-2017, 05:08 AM   #44
black2002ls
Lifer
VIP Member
 
black2002ls's Avatar
 
Join Date: Dec 2004
Posts: 7,512
Default

Quote:
Originally Posted by kingjason View Post
Ever have something figured out in your mind that is just not really going to pan out exactly how you planned it. I thought I ordered a floor mount cable Lokar. Apparently, I did not. The JB triple stick I can't decide if I want in the floor or all that sexy aluminum on top. I did buy the flush mount set up but need 4 inches underneath which I think I have six or so. I think if I bury the JB in the square, set the handles up with a tad of lean back, and drop the tranny shifter directly behind it I will be good. Might be a tad long but it will work. May just end up swapping the Lokar shifter to cable and putting the Lokar by the dash and the triple stick right behind it, like originally planned I think. The good news is I did get enough cable to move those JB's around a little.

Also, can you guys see my pics. I know I paid like a dollar to lose the advertisements a year ago, and it was for life. Just wondering if maybe I got lucky on the PB rip off. Or maybe I can just see them.

I can still see them. My photobucket is still working as it always has.

Sent from my SAMSUNG-SM-G930A using Tapatalk
__________________
Quote:
Originally Posted by Leah View Post
Best balls I've had in my mouth in a while.
black2002ls is offline   Reply With Quote
Old 08-09-2017, 01:16 AM   #45
kingjason
Notorious PIG
 
Join Date: Jul 2003
Location: Down South
Posts: 7,288
Default

Seats are finally in. You know I got to match.

__________________
Whos your Daddy?
kingjason is offline   Reply With Quote
Old 08-09-2017, 04:34 PM   #46
silverranger
Lifer
 
silverranger's Avatar
 
Join Date: Oct 2002
Location: Crowley
Posts: 1,081
Default

looking good
silverranger is offline   Reply With Quote
Old 08-10-2017, 08:40 PM   #47
kingjason
Notorious PIG
 
Join Date: Jul 2003
Location: Down South
Posts: 7,288
Default

A little body work and paint. The more I was sanding the more I thought, this is not a show car, I bet they barely washed the dirt off before they painted them sometimes.

__________________
Whos your Daddy?
kingjason is offline   Reply With Quote
Old 08-18-2017, 06:16 PM   #48
kingjason
Notorious PIG
 
Join Date: Jul 2003
Location: Down South
Posts: 7,288
Default

Shorter shifter=mo better. Dual mount optima box, bronco tank which fits......sorta! New LS radiator and I believe a tru cool 40k will drop right in front of it. Going to probably use led lights for blinkers and put a oil cooler behind one side and let the tru cool dip into the other side. I got a nice spray in bed liner kit for the bed floor and interior. This 100 percent humidity is stalling progress. Oh and my mom who is the sewing queen is stitching my top with nylon thread. It was new, just sat in the box for years and the thread got old. I refuse to mount my pretty seats until rain is not pouring in on them.



__________________
Whos your Daddy?
kingjason is offline   Reply With Quote
Old 08-19-2017, 09:12 AM   #49
Gasser64
Lifer
 
Gasser64's Avatar
 
Join Date: Oct 2013
Posts: 2,189
Default

Plans for bedliner and interior?
__________________
WAAAHH HA HA HA HAAAA!!!
Gasser64 is offline   Reply With Quote
Old 08-19-2017, 01:30 PM   #50
kingjason
Notorious PIG
 
Join Date: Jul 2003
Location: Down South
Posts: 7,288
Default

Yes. Well yes I bought a spray in bed liner for both. I am going to do some front floor pan work, then paint the center hump and doors tan, then bed line in the seat channels.



__________________
Whos your Daddy?
kingjason is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:54 AM.



Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.