CMC Mustang shakedown MSR-H

[Mach1]

Didn't finish the cage so I had to run project CMC in time trials, learned a lot from the car, the diff is trashed, didn't have a chance to put the sway bars on either so it was very "boaty". With that being said I ran a 1:50.3 which would have had me qualifying 5th out of 12 in CMC, not too shabby for the shakedown, car still has several seconds in it with a bit of suspension tuning and a working LSD.

[Baron Von Crowder]

not bad!

[rodroc]

Do you have some pictures of how you worked on your suspension?

[Mach1]

I do somewhere, I am very restricted by the rules, stock kmem, stock control arms, no coil overs, etc.
I am running dual adj konis, MM CC plates, 1100lb eibach springs, MM Rear LCA's, stock rear UCAs, MM rear Torque Arm springs.

[Baron Von Crowder]

I do somewhere, I am very restricted by the rules, stock kmem, stock control arms, no coil overs, etc.
I am running dual adj konis, MM CC plates, 1100lb eibach springs, MM Rear LCA's, stock rear UCAs, MM rear Torque Arm springs.

You missed the spammer's spam, since Don edited it out.

[Mach1]

You missed the spammer's spam, since Don edited it out.

bah, i sure do need a dpf delete!

[Baron Von Crowder]

bah, i sure do need a dpf delete!

mine was deleted from the factory.