2.3t tuning help

[t-bird123]

Stock cam? If so I'd say you've got some leaks

Yep, stock cam.

[4EyedTurd]

Buy one of these that fit the inlet of your turbo http://www.siliconeintakes.com/produ...5aac7a0c3fdcb8 or go down to home depot and build one. Pressurize intake and check for leaks

[46Tbird]

Thanks for the points to check out guys. A little more back store is it was running fairly good until the other day when I did a 1st and 2nd pull. It fell on its face near the end of 2nd gear and thats when it really started popping and banging.

Dude, I am 90% sure your timing belt jumped a tooth. Verify that the crank, distributor, and cam are in alignment.

[5.0Thunder]

Dude, I am 90% sure your timing belt jumped a tooth. Verify that the crank, distributor, and cam are in alignment.

Agree, cover the basics