need help Eaton swap vacuum diagram

[mustang4life]

I need help. I need a vacuum diagram for a eaton swap. Im deleting all the egr stuff. Finished everything else on the car just need this. Thanks for the help in advance

[shumpertdavid]

Remove the egr valve and follow the green plastic vacuum line from it back to the egr soleniod, remove it, and follow the red plastic vaccum line back to it's source and plug it. Also remove the DPFE (black plastic or silver metal box with 2 large silicone hoses, also has single connector with 3 wires) sensor, the egr tube with 2 silicone hoses that go to dpfe, and cap the nipple on the exhaust manifold or header. You can either leave the egr valve in place or build a block off plate for it. Hope this helps.

[mustang4life]

Thanks I'm going to go try it later. I will let u know the results

[mustang4life]

Thanks david it worked perfect. The car started and idiling perfect all I need is to get a tune now. Cant wait to hear the blower sound

[shumpertdavid]

no problem, congratulations.