1/12 2010 gt500

[black2002ls]

did you have hood fitment issues?

It depends, why do you ask? lol.

I had some chassis fitment issues which I think may have caused a small issue at the front of the fenders. Though I did not check clearance before I painted, and that could have led to gap issue. This has "pins" for hood hinges, it is a bit of a tight fit, so I have pretty much tried to leave the hood off so that it doesn't damage any of the paint before the show on Saturday. I will cut a brass hood prop to use on Saturday and "tack" it in place for the show to keep the hood open.

[4bangen]

did you have hood fitment issues?

[Shaggin Wagon]

Looks amazing as usual!

[black2002ls]

I put together a display base for this beast. Bevelled edge mirror, some 4d carbon fiber vinyl, and 1/24 scale tires. If I cant fint anything more suitable, I'll wrap them in CF vinyl for the display.



Sent from my SAMSUNG-SM-G930A using Tapatalk

[black2002ls]

Looks almost perfect, rear decklid where the fake gas cap is should be gloss black. (or peeling gloss black for the "correct" look after a few years).

Were they all black? Or body color?

[bird_dog0347]

Looks almost perfect, rear decklid where the fake gas cap is should be gloss black. (or peeling gloss black for the "correct" look after a few years).

[black2002ls]

Thinking I might build a model this week. you are rubbing off on me. lol

Jump on it! I'm currently fighting with the doors on my aventador. Kit is about 95% complete.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[4bangen]

Thinking I might build a model this week. you are rubbing off on me. lol

[black2002ls]

I didn't get a picture of it, but the emblems popped right off, so they are now correct.

This will get displayed on a piece of 1/8 MDF covered in carbon fiber printed vinyl. The board will be over cut to allow me room to mount a cobra logo. The car will be centered over a mirror so the underside detail can be seen. Anyone want to buy it? Lol



Sent from my SAMSUNG-SM-G930A using Tapatalk

[black2002ls]

I'm glad you kept it original with the 4wd package they all came with.

I hate it.... though with the stock wheels and tall tires, it would probably look worse lowered a bit.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[bird_dog0347]

I'm glad you kept it original with the 4wd package they all came with.

[black2002ls]

Not to be picky, but the Cobra emblems on the fenders are on backwards.




Now if it was a 1993 Cobra, well then...

Good eye. I will see if they will pop off....lol

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Rick Modena]

Not to be picky, but the Cobra emblems on the fenders are on backwards.




Now if it was a 1993 Cobra, well then...

[black2002ls]

And we are done! I managed 2 good pictures before my twonage made a solid attempt at an engine removal! :/

I'm going to try and get some dfwmustangs decals printed up for the windows. Either both quarters or the back glass.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[black2002ls]

Getting pretty close to done with this one. Door handles are glued in place, body was wiped down with wolfgang deep gloss liquid sealant. In a week or so i will wax it with colinite 915. It has some paint flaws, but I'm ok with it. Once it is waxed, I'll finish up the clear parts and add a wash to the panel lines. The wing has the CF decal on it and the first round of clear. It needs a bit of black touch up, clear leveled out, and re-sprayed.