Windham ARs?

[Pokulski-Blatz]

Ah, YHM's patented tactical slimming lines. Those slimming lines tested very well with operators.

In all seriousness it look like nothing more than another billet lower. While they fit a bit better than the forged ones, I don't much like them because they are so chunky. I have a Quentin Defense QD 15 Army marked upper and lower I bought years ago that fits really nicely like you would expect any billet receiver. One of these days I will build it into a MK11 clone.



Given the choice though I will take a forged lower over a billet one any day of the week just as a result of size.

[likeitfast55]

I saw one of these the other day. Very nice fit and finish. Have any info on this combo?

Yankee Hill. All Billet lower and matching Billet upper.

[Pokulski-Blatz]

I would build it out, shoot it to make sure everything is good to go before investing a shit ton of time and money.

I am just transferring my current SBR upper over to the Noveske. The old SBR lower has a el cheapo $260 10.5" upper waiting on it. I am setting a goal to put together a 10.5" free float railed SBR that is reliable for under $900 including the tax stamp.

[likeitfast55]

Damn. I am gonna have to check the Noveske lower Silencerco gave me later. I hope that lower is good, I can't wait to SBR it.

I would build it out, shoot it to make sure everything is good to go before investing a shit ton of time and money.

[Pokulski-Blatz]

He sent it back to Noveske. They sent him another, same sr#. Just a few months more to wait!

Damn. I am gonna have to check the Noveske lower Silencerco gave me later. I hope that lower is good, I can't wait to SBR it.

[likeitfast55]

He sent it back to Noveske. They sent him another, same sr#. Just a few months more to wait!

[Pokulski-Blatz]

Perfectly said.

Buddy bought a Noveske for his SBR build. Paid a shit ton for it. He got his trust waited his 9 months , stamp------ went to build his weapon, oooops the front take down pin holes were at a different angle making the lower worthless.
Just an example of even higher end overpaid components can have defects.

I had a similar issue with the LMT upper I bought for my SBR build. Nothing a bit of filing couldn't handle.

[likeitfast55]

I'm not sure what you mean, you understand that a lot of shit is unnecessary but you don't care? To summarize what I'm saying is just about all ar15's are the same for 99% of peoples uses. I wouldn't get caught up in who makes anything. There's only a handful of real separate components out there.

Perfectly said.

Buddy bought a Noveske for his SBR build. Paid a shit ton for it. He got his trust waited his 9 months , stamp------ went to build his weapon, oooops the front take down pin holes were at a different angle making the lower worthless.
Just an example of even higher end overpaid components can have defects.

Just a few on this board are above amateur status with regard to guns/components. To be clear, I am not one of them. The more I learn, the more I find out that I do not know shit about guns compared to some.

[silverranger]

CJ, just let it be. I'll explain some other time... I promise.

I'm not worried about value down the road or anything else. Just wanted to know if they made a quality product.

I trust y'all's opinion. That's why I asked.

I'm a glock owner...so what do I know

Fucking glock owner

For what you will be doing its a good choice and at that price shit once you get hooked start looking at something higher end if you choose to. (Although I would just start building after you got the hang of it) .

[Pokulski-Blatz]

CJ, just let it be. I'll explain some other time... I promise.

I'm not worried about value down the road or anything else. Just wanted to know if they made a quality product.

I trust y'all's opinion. That's why I asked.

I'm a glock owner...so what do I know

It will work fine.

[Mysticcobrakilla]

I'm not sure what you mean, you understand that a lot of shit is unnecessary but you don't care? To summarize what I'm saying is just about all ar15's are the same for 99% of peoples uses. I wouldn't get caught up in who makes anything. There's only a handful of real separate components out there.

CJ, just let it be. I'll explain some other time... I promise.

I'm not worried about value down the road or anything else. Just wanted to know if they made a quality product.

I trust y'all's opinion. That's why I asked.

I'm a glock owner...so what do I know

[Pokulski-Blatz]

Understand and don't care at the same time.

Than why even bother learning anything about the platform? Just buy whatever the neck bead behind the counter recommends.

[CJ]

Understand and don't care at the same time. Just wanted to know if what I was told was true.

308 will be had soon.


For free! Plus a glock 42, that won't be free but close enough.

I'm not sure what you mean, you understand that a lot of shit is unnecessary but you don't care? To summarize what I'm saying is just about all ar15's are the same for 99% of peoples uses. I wouldn't get caught up in who makes anything. There's only a handful of real separate components out there.

[Mysticcobrakilla]

Unless you're an idiot assembling one any ar15 is about the same as far as performance. Most shooters will never use their gun enough to see the benefits of higher dollar components, and won't ever need them. Take my little 7.5" piston upper you see me post often, that has a cheap ass redxarms barrel in it. $125 I think.

Understand and don't care at the same time. Just wanted to know if what I was told was true.

308 will be had soon.


For free! Plus a glock 42, that won't be free but close enough.

[CJ]

Unless you're an idiot assembling one any ar15 is about the same as far as performance. Most shooters will never use their gun enough to see the benefits of higher dollar components, and won't ever need them. Take my little 7.5" piston upper you see me post often, that has a cheap ass redxarms barrel in it. $125 I think.