How hard is it to mig/tig weld?

[OrangeChevyII]

Gas and Tig, not so much with a mig. You control the heat more with a torch and Tig where with a mig you just aim.

I am by NO means a expert. I speak only from my experience with the three.

[slow99]

At $32/hour was hoping something I could learn quick, oh well.

Choooo$$$$$$$$$$ chooooo$$$$$$$$$$$$$$$$$

[Baron Von Crowder]

If you can weld with a torch, you have an advantage. If you have experience that is, if not...a long time. Tig welding is an art.

It always seemed to me that gas and tig were somewhat similar.

[Matt]

I enjoy tig over mig any day.

[OrangeChevyII]

If you can weld with a torch, you have an advantage. If you have experience that is, if not...a long time. Tig welding is an art.

[Aceman85turbo]

mig is by far the easiest, literally anyone can do it. Tig, not so much.

[Ruffdaddy]

It's learning the different weld types, settings, materials...etc. not something you'll learn in a month unless you dedicate 8hrs a day.

What is being welded?

And I always thought TIG was the hardest, mig second, and arc the easiest.

[Matt]

At $32/hour was hoping something I could learn quick, oh well.

Hell, Where do I apply?

[samuel642000]

So easy a caveman could do it.

[JFurst]

At $32/hour was hoping something I could learn quick, oh well.

[Matt]

Depends on the person. Some people can never learn and some people are naturals. Then it takes some a while to figure out the technique

[JFurst]

Got a family friend looking to hire someone that has a good finished weld from mig and tig. How hard is it to quickly learn these two types of welds?