Here's a Sellers Rating for our wonderful classifieds....

[Rreemo]

So did you ever contact the seller after these issues but before this thread?

Yes, if you read back earlier in the thread....I contacted him about the flat tire once I discovered it was being caused by a badly leaking wheel. He played ignorant to the whole thing, basically said "well it had air when it left here, and they've just been stacked up in my garage". No offers to help make it right or anything like that. I seriously doubt that wheel just suddenly started leaking in 6-8 places just from riding in the back of my friend's Yukon. More likely that he aired it up just before Randy picked them up. After-all, the reason for the leak was b/c that loose sensor and valve stem chipped away a bunch of the sealant on the wheel...where it all goes together.

I haven't contacted him again since I discovered the mess inside that wheel....b/c I don't expect he will do anything anyway. I KNOW there was no way that sensor was working for him either, so that further proves the dishonesty to me. Bottom line, after paying that much for a set of wheels....I shouldn't have to be calling back and bitching....he knew the shit had issues and misrepresented it! That part is a given, and more-so the point of this thread.

[mustang_revival]

The bitch is worrying about screwing up a wheel with all the extra dismount and remount.

THIS is why I've let mine be up until now...

My wheels are pretty much flawless and I don't want them to get scratched having the tires dismounted/remounted..

[Trip McNeely]

From the salvage to fixed cars he puts up and his ties with that other dude, I would never do business with him ever. He has shady written all over him.

O'Reilly's also sells them also, fyi. Just good luck getting someone who knows what you're talking about.

[46Tbird]

Probably a little over $200 all said and done...$40 each on the sensors and then R&I tires on the other 3. I paid $52 including the senor for the one that I already did. But yeah either way...I'll get it taken care of.

The bitch is worrying about screwing up a wheel with all the extra dismount and remount. I know you've got a similar setup....so you know how much of a bitch these size tires tend to be.

I'm never happy about getting tires swapped. Hell, I was going nuts thinking about the dipsticks at Discount messing up a wheel and completely missed them tossing a jack under the rocker and fucking up my Boss 302 exhaust.

TPMS sensors have gone way down in the past year or so: http://www.ebay.com/itm/NEW-OEM-FORD...997c38&vxp=mtr

[CWO]

So did you ever contact the seller after these issues but before this thread?

[Rreemo]

Or, just spend another hundred bucks to not have to deal with that jankety shit!

Probably a little over $200 all said and done...$40 each on the sensors and then R&I tires on the other 3. I paid $52 including the senor for the one that I already did. But yeah either way...I'll get it taken care of.

The bitch is worrying about screwing up a wheel with all the extra dismount and remount. I know you've got a similar setup....so you know how much of a bitch these size tires tend to be.

[BMCSean]

Well yeah, I just gotta keep seller rep up though.

[Rick Modena]

its already a PMS, it doesnt care where it is.

I care where it is and so does Reemo. I'm sure he does because the wheels and tires were around 3.5k. My TPMS system has already saved me some money more then once. I got in my car and it was on when I started it up, I checked my W&T's and sure enough I had a real low tire. I changed my tire right then and there, but if not I would have been on a hwy and would have been changing a flat in a dangerous situation or fucked up the tire and rim.

White trash skill level 11.

lol! Yeah like a need the Plano police to pull me over and see some pipe bomb looking shit or worse have them bouncing around and have one blow off while I'm driving.

[SEB]

Those are my favorite replica wheels, and btw I don't know if Paul is serious or not but I never knew about .03 or an orange peel.

You know you jacked that shit. I didn't even get a orange Peel let alone a single cent LOL

[46Tbird]

Go to Home depot and buy a foot of 3" pvc, and two end caps. drill a hole in one cap, put a valve stem in it. Toss your sensors in, and seal it up. Fill it up with 32psi, and toss it under the seat.

Or, just spend another hundred bucks to not have to deal with that jankety shit!

[BMCSean]

Those are my favorite replica wheels, and btw I don't know if Paul is serious or not but I never knew about .03 or an orange peel.

[SEB]

LOL That's Seb's problem now unless he has sold them already. I never even drove on them.

I had them on my 95 GT & they looked NICE! But had to sell them to get The Joker




Now it sits on Polished Split Spokes & will soon be For Sale once I strip it for its suspensions & Springs & Manuel rack & Intake & Rockers

[Ruffdaddy]

Go to Home depot and buy a foot of 3" pvc, and two end caps. drill a hole in one cap, put a valve stem in it. Toss your sensors in, and seal it up. Fill it up with 32psi, and toss it under the seat.

White trash skill level 11.

[Baron Von Crowder]

Sooo, it will be a PMS not a TPMS, gotcha...

its already a PMS, it doesnt care where it is.