Faux wood blinds

[s1lv3r]

If you need a specific blind, let me know exactly what you need and I will get you a price.

Example - 2" faux, color antique white, crown valance or flat valance, inside mount or outside mount, width and length.

Can I get a price for 2" faux, white, inside mount, 70 3/4 by 83? Do you have cordless? I also need a couple of tilt mechanisms too. Is that something you have as well?

[s1lv3r]

I'm guessing this is a flat valence, 2 inch slat, inside mount. 47 1/2 x 70 would fit. Also, probably antique white, they do not seem bright white. Standard builder edition, if that makes any sense?

I think the valance is the piece that would clip onto what you have pictured? Kind of like a trim piece to cover the blind at the top.

[yellowstang]

If you need a specific blind, let me know exactly what you need and I will get you a price.

Example - 2" faux, color antique white, crown valance or flat valance, inside mount or outside mount, width and length.

I'm guessing this is a flat valence, 2 inch slat, inside mount. 47 1/2 x 70 would fit. Also, probably antique white, they do not seem bright white. Standard builder edition, if that makes any sense?

[CJ]

Friend is interested. Send me an email.

[CJ]

Shit. Just about to order some 35" wide. Can they be cut down?

I need 4 @ 35"x58"

[kenny c]

Thanks for checking! Unfortunately for me, I need like 68" length

If you need a specific blind, let me know exactly what you need and I will get you a price.

Example - 2" faux, color antique white, crown valance or flat valance, inside mount or outside mount, width and length.

[yellowstang]

Yup, even extended all the way, would not be long enough... ;-)

[Baron Von Crowder]

No problem, I figured you'd need longer length.

Poor Lyn

[idrivea4banger]

Thanks for checking! Unfortunately for me, I need like 68" length

No problem, I figured you'd need longer length.

[yellowstang]

They are 2" slats. We have 47.5x58.5 only.



For everyone else, I'll be posting up a list of sizes that may also need to be cleared out.

Thanks for checking! Unfortunately for me, I need like 68" length

[idrivea4banger]

Let me know. And to double check, they are 2 inch slats? (look like it from the pic).

They are 2" slats. We have 47.5x58.5 only.



For everyone else, I'll be posting up a list of sizes that may also need to be cleared out.

[yellowstang]

Let me know. And to double check, they are 2 inch slats? (look like it from the pic).

[idrivea4banger]

Damnit, I need 47 1/2 width. Dog broke one of the slats.

I can check to see if we have any in stock. Mostly looking to unload the size in the OP because they were ordered in the wrong size. We have around 500qty that need to be cleared out of the inventory.

[yellowstang]

Damnit, I need 47 1/2 width. Dog broke one of the slats.

[stephen4785]

Lol, I was thinking you were referring to deer blinds.