For the haters and second guessers, bench racers and more.

[rz5.0]

Yeah definitely ! It's good stuff

made me laugh but i don't have anything else to say....

[grove rat]

you guys r sooo dum he said he was gonna keep it below 6500 duh

[crapstang]

I highly doubt detonation caused that line...

[greenbullitt]

the rest of how that crack looks as it grows

http://www.amtracingengines.com/images/tech/crackoverall.jpg

until it splits in half with everything hanging out the bottom

"K"

[crapstang]

lmmfao, you put a cracked block back together!

The catastrophe that those bring! Built2layframe should post up!

oh, and btw detonation is good reason for that block to do that


"K"

I don't know, I've heard he put it back together really well. Let's make a bet on how many miles it holds together

[greenbullitt]

lmmfao, you put a cracked block back together!

The catastrophe that those bring! Built2layframe should post up!

oh, and btw detonation is good reason for that block to do that


"K"

[91CoupeMike]

For real doe

[FRANCISCO308]

Yes why else would I waste my time?

You "won't waste time" getting the right push rods but you'd run a shitty block?

[crapstang]

Get someone to weld a brace plate into the valley

[91CoupeMike]

Yeah, but if the pushrods were the wrong length, would you actually swap them out for the right ones? or just YOLO!

Yes why else would I waste my time?

[majorownage]

Yeah, but if the pushrods were the wrong length, would you actually swap them out for the right ones? or just YOLO!

YOLO is my life motto.

[Pooter]

Have to verify cam timing, pushrod length and piston to valve clearance. One I get that done it's nuts and bolts and plug and play.

Yeah, but if the pushrods were the wrong length, would you actually swap them out for the right ones? or just YOLO!

[MstangsBware]

You better bring more than last time!

I got ya.....Motor is coming out soon for some upgrades an a few more MODs...It will be ready to run...

[03shadow4v]

Were you serious about the JB weld

Yeah definitely ! It's good stuff

[91CoupeMike]

Longest HCI swap evar!

Had me working crazy shifts. Haven't had the time I needed to make it right.

Going to bust ass tomorrow and see if I can't start it.

Have to verify cam timing, pushrod length and piston to valve clearance. One I get that done it's nuts and bolts and plug and play.