Trade/Barter thread

CJ · 12-19-2012, 09:44 PM

I've noticed that I have a lot of unnecessary stuff I don't really need myself and I figured a lot of you guys probably do also. So post up anything you guys are looking to trade and what you're looking for.

As for me I'm set up for stippling polymer for a while now and I've never really offered to do any for people. But, I'm looking for some extra pmags and I figured maybe a few on the board would be interested in trading some work for a mag. Basically, I'll stipple 3 of your pmags for 1 pmag in exchange. You'll find that's pretty damn good compared to other people stippling out there. And I'm not talking about crappy stippling, I'll make sure it's very uniform and professional looking. Not sure if I'll stay at 3/1 ratio, might be underselling myself there, but for now that's what I'll start out with.

Also, I have a lot of 1911 parts (mostly pull off stuff), 10/22 FCG's and various parts, MKIII parts (mostly hammers/sears, etc.), some 16ga ammo, .30 carbine M2 30rd magazine, ask me I might have it.

motoman · 12-19-2012, 10:11 PM

That's a pretty badass job on the stippling. I don't have any mags to offload but I've got some brass, shot shells, and projectiles I'd trade.

Sent from my Galaxy Nexus using Tapatalk 2

CJ · 12-19-2012, 10:12 PM

Quote:

Originally Posted by motoman

That's a pretty badass job on the stippling. I don't have any mags to offload but I've got some brass, shot shells, and projectiles I'd trade.

Sent from my Galaxy Nexus using Tapatalk 2

I might be interested in projectiles

bottlerocket · 12-19-2012, 10:21 PM

Those look great CJ! PM inbound

motoman · 12-19-2012, 10:25 PM

PM incoming. They are 30cal projectiles.

Sent from my Galaxy Nexus using Tapatalk 2

01yz2nv · 12-19-2012, 10:25 PM

I'd be willing to trade some AR mags for a 5.45x39 mag.

TeeShock · 12-19-2012, 11:24 PM

Three (3) XD40 Grip extensions. Replaces the base of the magazine.
I'd like a few shotgun shells or 40 cal rounds in exchange for them.

mikec · 12-20-2012, 07:44 AM

That looks damned good.

Shockeruti · 12-20-2012, 09:45 AM

What kinda 10/22 parts ya got?

CJ · 12-20-2012, 09:49 AM

Quote:

Originally Posted by Shockeruti

What kinda 10/22 parts ya got?

a stainless colored plastic FCG, black synthetic stock, and mostly parts to build a 10/22 - stock stuff.

Reefer Rae · 12-20-2012, 11:04 PM

40 rounds of .38 ammo 25 of which are horniday hollow point . Looking for 2 pmags or 50-100 5.56 rounds . Fmj,jhp, reload, steel ,whatever. I'm in cleburne and visit ft worth, and arlington regularly..

Quadforce · 12-20-2012, 11:21 PM

Quote:

Originally Posted by TeeShock

Three (3) XD40 Grip extensions. Replaces the base of the magazine.
I'd like a few shotgun shells or 40 cal rounds in exchange for them.

I have a Magpul MOE handgaurd Black(carbine length) I would trade for these.. pics please

NoClassic · 12-21-2012, 02:30 AM

edit: the items I listed ended up getting sold

bigmuskie · 12-21-2012, 03:39 AM

I'm in on stippling. That's badass! I'd like to get six mags done and if you're interested, I have a foliage PMag. Might have two, ill check when I get home.

TeeShock · 12-21-2012, 07:56 AM

Quote:

Originally Posted by Quadforce

I have a Magpul MOE handgaurd Black(carbine length) I would trade for these.. pics please

Is this existing hand carbine length?
16" mid-length

motoman · 12-21-2012, 07:58 AM

Quote:

Originally Posted by TeeShock

Is this existing hand carbine length?
16" mid-length

That looks like a mid length.

TeeShock · 12-21-2012, 08:02 AM

Quote:

Originally Posted by motoman

That looks like a mid length.

Fudgecicles

Installed.

Quadforce · 12-21-2012, 08:27 AM

Quote:

Originally Posted by TeeShock

Fudgecicles

Installed.

yep the one I have is carbine length in really really good shape the gun you showed looks to be a mid length

TeeShock · 12-21-2012, 08:32 AM

Pm your address I will ship them today or tomorrow unless you are local. I dont think the hand guard length will work on my setup. All I ask for is shipping reimbursement.

Quadforce · 12-21-2012, 08:37 AM

Quote:

Originally Posted by TeeShock

Pm your address I will ship them today or tomorrow unless you are local. I dont think the hand guard length will work on my setup. All I ask for is shipping reimbursement.

pm sent Thanks

12-19-2012, 09:44 PM	#1
CJ User is editing post Join Date: May 2002 Location: Arlington, TX Posts: 37,623	Trade/Barter thread I've noticed that I have a lot of unnecessary stuff I don't really need myself and I figured a lot of you guys probably do also. So post up anything you guys are looking to trade and what you're looking for. As for me I'm set up for stippling polymer for a while now and I've never really offered to do any for people. But, I'm looking for some extra pmags and I figured maybe a few on the board would be interested in trading some work for a mag. Basically, I'll stipple 3 of your pmags for 1 pmag in exchange. You'll find that's pretty damn good compared to other people stippling out there. And I'm not talking about crappy stippling, I'll make sure it's very uniform and professional looking. Not sure if I'll stay at 3/1 ratio, might be underselling myself there, but for now that's what I'll start out with. Also, I have a lot of 1911 parts (mostly pull off stuff), 10/22 FCG's and various parts, MKIII parts (mostly hammers/sears, etc.), some 16ga ammo, .30 carbine M2 30rd magazine, ask me I might have it. __________________ "When the people find that they can vote themselves money, that will herald the end of the republic." -Benjamin Franklin "A democracy will continue to exist up until the time that voters discover that they can vote themselves generous gifts from the public treasury." -Alexander Fraser Tytler

12-19-2012, 10:25 PM	#6
01yz2nv Lifer Join Date: Dec 2005 Location: Princeton Posts: 3,646	I'd be willing to trade some AR mags for a 5.45x39 mag. __________________ "You don't so much drive it, more like poke it with a sharp stick and channel the fury when you piss it off." FFL & LTC Instructor http://firstresponsefirearms.com/ Factory Five MK4 Cobra Build thread-http://www.dfwmustangs.net/forums/showthread.php?t=17889 http://s1124.photobucket.com/albums/l571/BlitzAttack65/ www.wix.com/cdurhamwot/blitzattack-mk4-build

12-20-2012, 07:44 AM	#8
mikec Lifer Join Date: Mar 2002 Posts: 24,712	That looks damned good. __________________ www.allforoneroofing.com

12-20-2012, 11:04 PM	#11
Reefer Rae Time Served Join Date: Feb 2011 Posts: 818	40 rounds of .38 ammo 25 of which are horniday hollow point . Looking for 2 pmags or 50-100 5.56 rounds . Fmj,jhp, reload, steel ,whatever. I'm in cleburne and visit ft worth, and arlington regularly.. __________________ The only difference between a tax man and a taxidermist is that the taxidermist leaves the skin. -- Mark Twain

12-21-2012, 02:30 AM	#13
NoClassic Lifer Join Date: Nov 2010 Location: DFW Posts: 1,094	edit: the items I listed ended up getting sold Last edited by NoClassic; 12-25-2012 at 03:01 AM.

12-19-2012, 10:21 PM	#4
bottlerocket Lifer Join Date: Oct 2002 Location: Wichita Falls, TX Posts: 9,343	Those look great CJ! PM inbound

12-19-2012, 11:24 PM	#7
TeeShock Sue me sue me Join Date: Nov 2007 Location: Richard's child Posts: 2,850	Three (3) XD40 Grip extensions. Replaces the base of the magazine. I'd like a few shotgun shells or 40 cal rounds in exchange for them.

12-20-2012, 09:45 AM	#9
Shockeruti Time Served Join Date: Nov 2010 Location: Midlothian Posts: 236	What kinda 10/22 parts ya got?

12-21-2012, 03:39 AM	#14
bigmuskie Time Served Join Date: Nov 2007 Location: Arlington, Tx. Posts: 874	I'm in on stippling. That's badass! I'd like to get six mags done and if you're interested, I have a foliage PMag. Might have two, ill check when I get home.

12-21-2012, 08:32 AM	#19
TeeShock Sue me sue me Join Date: Nov 2007 Location: Richard's child Posts: 2,850	Pm your address I will ship them today or tomorrow unless you are local. I dont think the hand guard length will work on my setup. All I ask for is shipping reimbursement.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode