Seeking Mechanic in or near Frisco for fox body

RobbyJ · 01-14-2017, 05:33 PM

I've got an 89 GT fox body mostly stock and looking to put alum heads, intake & cam on. I already have those 3 things in my garage. Looking to see if there is anyone out there that can do this work or can suggest someone in or near Frisco. I know other things will need to be done to support those pieces, and that's fine.

I've had the car for about 2 yrs now and it mostly sits in the garage. The battery is actually dead now

. It's mostly stock outside of being lowered and inch or 2, shaved door handles, bbk shorty headers, off road h pipe, 373 gears. I'm looking to add the TFS 170 ported heads, cobra intake and a comp cam that I already have from a pal Slowturbocar. Oh and I have a 255 walbro fuel pump.

Any body out there in the stang community that can help a brotha out?

BMCSean · 01-14-2017, 05:38 PM

Check out BSP motorsports, he is on the edge of Frisco and does great work.

johnboy · 01-14-2017, 05:54 PM

Check with whiteboy (Jeremy). He buys and sells and parts out mustangs and will also work on them. His shop is in Sachse

RobbyJ · 01-15-2017, 06:59 AM

Thank so Fellas. I'm going to contact BSP tomorrow.
Any ballpark estimates of what I might be looking at?

DON SVO · 01-15-2017, 08:41 AM

Quote:

Originally Posted by RobbyJ

Thank so Fellas. I'm going to contact BSP tomorrow.
Any ballpark estimates of what I might be looking at?

Pricing on heads/cam intake can vary a lot based on what else you're missing to do the job. Fluids, gaskets, old vacuum hose breaks, find a worn out timing chain and water pump etc.

slowturbocar · 01-15-2017, 08:51 PM

I can do the install for you since you bought the stuff from me,little far from you though but let me know if i can help.

RobbyJ · 01-23-2017, 10:59 AM

Thanks for all of the replies fellas! Slowturbocar- I wish I was closer in proximity to you

01-14-2017, 05:33 PM	#1
RobbyJ Punk Ass Newbie Join Date: May 2016 Posts: 6	Seeking Mechanic in or near Frisco for fox body I've got an 89 GT fox body mostly stock and looking to put alum heads, intake & cam on. I already have those 3 things in my garage. Looking to see if there is anyone out there that can do this work or can suggest someone in or near Frisco. I know other things will need to be done to support those pieces, and that's fine. I've had the car for about 2 yrs now and it mostly sits in the garage. The battery is actually dead now . It's mostly stock outside of being lowered and inch or 2, shaved door handles, bbk shorty headers, off road h pipe, 373 gears. I'm looking to add the TFS 170 ported heads, cobra intake and a comp cam that I already have from a pal Slowturbocar. Oh and I have a 255 walbro fuel pump. Any body out there in the stang community that can help a brotha out?

01-14-2017, 05:54 PM	#3
johnboy Egotistical son bitch VIP Member Join Date: Aug 2010 Posts: 296	Check with whiteboy (Jeremy). He buys and sells and parts out mustangs and will also work on them. His shop is in Sachse __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-14-2017, 05:38 PM	#2
BMCSean Always lurking Join Date: May 2007 Location: Argyle Posts: 5,626	Check out BSP motorsports, he is on the edge of Frisco and does great work.

01-15-2017, 06:59 AM	#4
RobbyJ Punk Ass Newbie Join Date: May 2016 Posts: 6	Thank so Fellas. I'm going to contact BSP tomorrow. Any ballpark estimates of what I might be looking at?

01-15-2017, 08:51 PM	#6
slowturbocar Time Served Join Date: Nov 2010 Posts: 455	I can do the install for you since you bought the stuff from me,little far from you though but let me know if i can help.

01-23-2017, 10:59 AM	#7
RobbyJ Punk Ass Newbie Join Date: May 2016 Posts: 6	Thanks for all of the replies fellas! Slowturbocar- I wish I was closer in proximity to you