Where to get a 2 stroke bored locally?

[JC316]

Looking for some recommendations on a shop that can bore out a 250cc 2 stroke polaris engine and maybe even sell me a top end kit. My trailboss shit the bed on compression, I can do the disassembly and reassembly myself, just need someone that can bore it out.

[Country cracker]

You can take it up to any motorcycle shop and have them hone the jug if its not to scared up. I have taken numerous jugs up to Honda Kawasaki west to have them honed for $0-20 depending on how bad it is.

[JC316]

You can take it up to any motorcycle shop and have them hone the jug if its not to scared up. I have taken numerous jugs up to Honda Kawasaki west to have them honed for $0-20 depending on how bad it is.

I haven't cracked it open, but I don't think it's that bad. Compression is 90 PSI max. It was running fine, but it started backfiring and now it wont start at all.

[Country cracker]

I would just go get it honed if its just a little scratched up and fire another 250 top end kit in it. I've had em honed and the same top end kit on a race bike 3 times without having it bored,sleeved, or just bought a new jug.

[Sean88gt]

SMS Racing in Denton should be able to do it. Good guys, Caleb Ramsay is the #1 pro in TCCRA, he's a mechanic up there.

Might also shoot Buick355 a msg, he had his done.

[Buick355]

I had my YZ250 done through Millennium Technologies (Eric Gorr), but he did a big bore kit, port work, head work, etc.

If it's nikasil plated and needs to be re-plated, these guys are supposed to be awesome:

http://www.usnicom.com/

If the plating still looks good and just needs a little cleaning up (still has crosshatch) just scotchbrite that bitch and put a new piston, rings, wristpin, and bearing in it.

[Grape]

if it's nikasil and needs to go over size by a tenth or two, we have the diamond hones capable of removing material. If it's fubar'd, it will need to go to millenium.

[VaderTT]

SMS Racing in Denton should be able to do it. Good guys, Caleb Ramsay is the #1 pro in TCCRA, he's a mechanic up there.

Might also shoot Buick355 a msg, he had his done.

They are a few blocks from my house and I've heard good things!

[jammeejamm]

sms only if you own a ktm...

i would find someone else if you have a different color machine.

[loc712]

Pro Max Powersports in Springtown dropped a jug off in the morning and rode it that evening

[SSMAN]

Grape, does damn nice work and quite honestly you will not get better quality work