Pics of nitrous bottles

[LaserSVT]

That's Brian Earl Spilner to you! Sounds like a serial killers name don't it.

Typical white boy name.

[VaderTT]

http://image.mustangmonthly.com/f/9453234+w750+st0/0303173_12z+Ford_Mustang_GT500+Trunk_View_NOS_Bottle.jpg

[redrocket5.0]

We had a hatch burn down in Okc a while back and when the bottles burst due to the heat it sent the hatchback about 100 feet in the air. I can post pics later. Sad sad day.

[juic3d]

What another way you can mount the nitrous. I really don't want to take the intake the upper and lower intake off. I don't really like it punched into the elbow on the cold air sleeve.

[scootro]

Where might you have got this pic, I'm guessing that is a 92 black coupe. I ask this because I was the one that put the bottle there for the owner (at the time). I had intentions of trimming out the flap with matching vinyl and velcro, but never got around to it.

got it from a google image search

[shumpertdavid]

got it from a google image search

I wish I would have gotten to finish it all out and have had it tied in. It was done in the early to mid 2000's if I rememeber correctly. Was going to be a small hit for the trips to mexico before they died off in my parts. The guy had a rep for running the bottle so we were going to set it up where he could show the main bottle disconnected if they pushed hard lol.

[Z06killinsbf]

What another way you can mount the nitrous. I really don't want to take the intake the upper and lower intake off. I don't really like it punched into the elbow on the cold air sleeve.

I used a Vac port on the side of my Perf RPM.

[scootro]

I wish I would have gotten to finish it all out and have had it tied in. It was done in the early to mid 2000's if I rememeber correctly. Was going to be a small hit for the trips to mexico before they died off in my parts. The guy had a rep for running the bottle so we were going to set it up where he could show the main bottle disconnected if they pushed hard lol.

haha it was a pretty clever location!

[shumpertdavid]

I like to be able to open the bottle with ease, so this is how it's done in my regal.

[Rreemo]

Looks like Brian Spilners Supra.

Or someone trying to compensate for something

[Grimpala]

Or someone trying to compensate for something

2 bottles, the big ones!