Announcement

Collapse
No announcement yet.

Random car thread.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Like (x)
    Dislike ( )
    Originally posted by stevo
    Not a good idea to go Tim 'The Toolman' Taylor on the power phallus.

    Stevo

    Comment


    • The block doesn't look like a Cleveland to me. I think it's a Windsor with Cleveland style heads.
      68 Coupe- 351w, TFS heads, Comp XE284, 5 speed, Explorer 8.8, 4 Wheel Discs
      63 Fairlane


      Originally posted by forbes
      i call 1911 first then 911

      Comment


      • That's what I should have said. Sorry

        Comment


        • You guys are slipping. It's a 429.

          Comment


          • Ford Racing's newest entry into the NHRA's Factory Stock wars comes with their Ninja engine program, based around an aluminum engine block, NASCAR cylinder head technology, and Chris Holbrook's expertise.


            Over Labor Day Weekend, the NHRA’s traditional stop in Indianapolis saw a new combination this year in the series’ Factory Showdown event. The Factory Stock Showdown is run at four events throughout the course of the season. There are stops at Gainesville, Indianapolis, Maple Grove, and Las Vegas, with the goal to showcase the three major manufacturers’ latest and greatest racing engines in their latest chassis platforms.

            This year, Ford Racing Parts stepped up to the plate with an all-new program aimed at powering their Cobra Jet racers in the FS/B naturally-aspirated class. FS/B has very specific rules – the engine must measure between no more than 430 cubic inches, carry a minimum weight of 3,350 pounds, and has an index of 10.35. Engines smaller than 400 cubic inches carry a minimum weight of 3,250 pounds – and that’s about it. The Cobra Jet Mustangs in this instance race against COPO Camaros and Drag Pack Challengers.

            Comment


            • Originally posted by homealone View Post
              You guys are slipping. It's a 429.
              429 CI yes. 429 BBF no. Read the link, it's 351 based with D3 heads. Rapid prototyped intake based on the 5.0 intake.

              Thanks for the link!
              Last edited by Torinoman; 04-29-2015, 09:10 PM.
              1971 Ford Torino - Time to go bigger and better.

              2011 F150 Limited - Stock with a 6.2

              Comment


              • Originally posted by Torinoman View Post
                429 CI yes. 429 BBF no. Read the link, it's 351 based with D3 heads. Rapid prototyped intake based on the 5.0 intake.



                Thanks for the link!
                Link was posted after homealone posted.
                .

                Comment








                • Comment


                  • Originally posted by 71chevellejohn View Post
                    Link was posted after homealone posted.
                    1971 Ford Torino - Time to go bigger and better.

                    2011 F150 Limited - Stock with a 6.2

                    Comment






                    • Comment


                      • Comment




                        • Comment


                          • Originally posted by ALLAN View Post
                            Is the belt line crease always so sharp on those cars or is that paint or bodywork to add emphasis? Looks killer either way. Dew want
                            1971 Ford Torino - Time to go bigger and better.

                            2011 F150 Limited - Stock with a 6.2

                            Comment


                            • Comment


                              • Originally posted by ALLAN View Post
                                That looks pretty dope.
                                .

                                Comment

                                Working...
                                X