Home made parts cleaners

[Quadforce]

I know some of you guys are pretty crafty... Anyone made one or tried something like this? I'm thinking about it for carb cleaning... Or anything for that matter. I thought this was a pretty cool idea.

What do you think?

[ame]http://www.youtube.com/watch?v=1EH6atYydBc[/ame]
[ame]http://www.youtube.com/watch?v=6cSdL7I4AHM[/ame]

[Jimbo]

I just got one of these for $50 and filled it with mineral spirits.

http://www.northerntool.com/shop/tools/product_200381752_200381752

[bpawl]

I just got one of these for $50 and filled it with mineral spirits.

http://www.northerntool.com/shop/tools/product_200381752_200381752

thats what I was thinking, take that DIY spirit and make a margarita machine instead.

[Frank]

I want to see a before and after results.

I wanted to make a dry vibratory cleaner like reloaders use just to clean up nuts and bolts.

[Pope]

I just got one of these for $50 and filled it with mineral spirits.

http://www.northerntool.com/shop/tools/product_200381752_200381752

good luck cleaning a cylinder head thoroughly with that.... Seems like this DIY would work pretty good. I agree though, a before/after would be nice.

[DFWtechie]

I just got one of these for $50 and filled it with mineral spirits.

http://www.northerntool.com/shop/tools/product_200381752_200381752

I got the 20 gallon HF unit like this that Heads fit in just fine. I think I made add a sander to the side. I run the PSC from Tractor supply in so I wonder if I add the sander to the side if it will work better when soaking parts.

[Jimbo]

good luck cleaning a cylinder head thoroughly with that.... Seems like this DIY would work pretty good. I agree though, a before/after would be nice.

It was in regards to the OP's request for carburetor cleaning.

[danielhv]

Pretty interesting attempt... I'd be interested in seeing the results as well. I'm in the parts cleaning industry, and true ultrasonics have a little more science behind them, but they are pretty damn expensive!