SC Saleen Rims or Anthractic Bullets

[TorqueJunkie]

Saleens

[Ted]

Ronal Teddybears

^^^This guy gets it

[Thehead]

Sell me the sc wheels really cheap and sell the bullets and buy some true forged or something similar.

[BMCSean]

Sell me the sc wheels really cheap and sell the bullets and buy some true forged or something similar.

What do you need wheels for?

[Thehead]

Nova Wagon

[SEB]

Sell me the sc wheels really cheap and sell the bullets and buy some true forged or something similar.

Last set I sold with Nitto's on all 4 tires I sold for $1600 cash and his old pony rims & tires. Not sure if thats cheap. The tires where over $1000 grand new & the rims where over $800. Rims & tires arnt cheap if you have new tires on them

[big_tiger]

How's that car holding up?

[SEB]

How's that car holding up?

Its a great car! Runs like a top. Trans did go out on me & had to put in a 3rd & 4th gear cluster. Set me back $600 with me doing the labor, Installing a Edelbrock RPM Intake on it right now. Since I got it I added

Alum DS
75mm Pro M Bullet
75mm Throttle Body
Crane 1.7 RR

Already had
Shortys Headers
Offroad H-Pipe
U/D Pulleys

Dynoed 232 RWHP 299 RWTQ with all the mods above, not to bad for a Bolt On car. Im hoping for 275 RWHP 320 RWTQ with the Edelbrock RPM Intake. Car gets awsome gas mileage! Im gasket matching the Intake & heads to a 1250 gasket & ported out the Elbow & Intake to 75mm to match the 75mm TB

[Pro88LX]

Im hoping for 275 RWHP 320 RWTQ with the Edelbrock RPM Intake.

I think thats being a little optimistic for just adding an intake.

[BlueCoupeRedVert]

SCs look great!

[lincolnboy]

gee i wonder what wheels these are.

[SEB]

gee i wonder what wheels these are.

Those are TITS!

[FoxBodyNick]

The Saleens look much better SEB.

As for the power I would say maybe 240-245 to the wheels.

[SEB]

I think thats being a little optimistic for just adding an intake.

We will see, Im gonna try! I am doing some other little things that might help or might not. Going to run Ford Motorsport 1.6s on the Intake side. Got a set of 12 given to me by a buddy on a deal & hear running 1.6s is good for 3 HP & gonna index my plugs & bump my timing up to 16, Im at 12 now, & adding a MSD 6AL box, Im thinking 26 from the intake & maybe 7 from the other stuff, Prolly more like mid 260 range, But sure would be cool if it hit 270+

[SEB]

The Saleens look much better SEB.

As for the power I would say maybe 240-245 to the wheels.

I think def more then 245 RWHP, 232 was stock intake, Pretty sure a RPM Intake adds more then 13 RWHP