Do me a solid?

[AnthonyS]

As an AMA club president, former AMA safety officer, a somewhat public figure in the hobby, and an owner of many sharp spinnie things.... my only advice is that this will only end in tears, and maybe a lawsuit.

I’m just a lowly member and terrible RC pilot.

[4bangen]

Since this is a video thread. I just posted my first video to my facebook page. I haven't started a youtube channel yet. I need to set up a camera stand amd light rig first.

This was unedited and shot from my cell phone. Yes, I know, I sound like a hillbilly. Take number 3. I had a general idea of what I wanted to talk about, though it took 3 takes to get it all in there.

Facebook.com/lonestarmodelworks

Sent from my SAMSUNG-SM-G930A using Tapatalk

awesome! I just followed your page, and can't wait for your channel. I still have those ruined coupes you sent me. lol
one day I'll build them as junk yard cars.

I’m just a lowly member and terrible RC pilot.

I only spout these words because I'm obligated. I have TONS of video I can't post online due to how it would effect the hobby. One of those videos may or may not include a 73" rc airplane flying all the way down my street at full throttle 3 feet off the ground with cars on both sides of the street. I may also be making this up and it never really happened. In fact I should say that this video filmed on board the airplane using a cheap key chain camera back before hd cameras where affordable doesn't exist at all, and isn't worth looking into. I made it all up as a joke to cheer myself up after all my guns where lost in a boat fire...

[black2002ls]

awesome! I just followed your page, and can't wait for your channel. I still have those ruined coupes you sent me. lol
one day I'll build them as junk yard cars.

That's awesome! I forgot I sent those to you. Hopefully over the next few months I can finish up the re-work on the coupe and make a new mold. I've been selling off old kits, projects, and parts to move some newer projects along. I took a look at what I had and what I was going to realistically build, the rest, is getting sold off little by little.

I'm going to try and get a youtube page set up this week. I have an old one from when I was running bars and in the music scene. If I can change the name on that account, I'm good to go.

Edit:

So, I changed the name on my old channel. I have a few videos that I uploaded from my bar/music business days. They don't pertain to the channel, I just have a hard time deleting them.

https://youtu.be/_ZOF9HUiNYI

Have a watch, subscribe.

[4bangen]

That's awesome! I forgot I sent those to you. Hopefully over the next few months I can finish up the re-work on the coupe and make a new mold. I've been selling off old kits, projects, and parts to move some newer projects along. I took a look at what I had and what I was going to realistically build, the rest, is getting sold off little by little.

I'm going to try and get a youtube page set up this week. I have an old one from when I was running bars and in the music scene. If I can change the name on that account, I'm good to go.

Edit:

So, I changed the name on my old channel. I have a few videos that I uploaded from my bar/music business days. They don't pertain to the channel, I just have a hard time deleting them.

https://youtu.be/_ZOF9HUiNYI

Have a watch, subscribe.

You don't have to delete anything, you can leave them there or set them to private.

I'm subbing right now.

I need to sell some of my kits off. I have tons of them.

[black2002ls]

You don't have to delete anything, you can leave them there or set them to private.

I'm subbing right now.

I need to sell some of my kits off. I have tons of them.

Let me know when you do. I have some that I am looking for, and know a few places to sell without dealing with feebay

Sent from my SAMSUNG-SM-G930A using Tapatalk

[4bangen]

Let me know when you do. I have some that I am looking for, and know a few places to sell without dealing with feebay

Sent from my SAMSUNG-SM-G930A using Tapatalk

I'll photograph them all for you.

[4bangen]

Newest video. Been using my CNC machine to design a reputable b-17 kit so we can build in bulk. Oddly it's not going as well as we'd like. The old ones that I cut by hand fly amazingly. These computer cut ones are having some serious trouble.
And I picked up the sponsor I've been going after.

[4bangen]

https://www.facebook.com/Rumbuilder/videos/1345046582358042/

here's a sneak peak I put on fb of the Im uploading tonight using The Sarge's plane.

[The Sarge]

https://www.facebook.com/Rumbuilder/...5046582358042/

here's a sneak peak I put on fb of the Im uploading tonight using The Sarge's plane.

Looks awesome!

[4bangen]

Looks awesome!

Was the sound messed up for you? I don't normally do facebook videos. This seems messed up on my work computer.

[Craizie]

Lol. I didn't watch much but I kept thinking you were flying too low and then smack!

[kobuzz]

I'll photograph them all for you.

Can you shoot the pics to me as well??

[4bangen]

Can you shoot the pics to me as well??

pm me your email.

[The Sarge]

Was the sound messed up for you? I don't normally do facebook videos. This seems messed up on my work computer.

Sound was perfect

[4bangen]

Finally here's the video. We kinda gave up on caring about video production on this one. But heck we had fun and I think it shows. Man it was dark. Lol