Cheap AR-15 Complete Uppers.

[bronco71]

Charging handle is the same for both...

[Mr_Fiux]

But he's looking for a complete upper. You're still shy a barrel, nut, handguards, gas tube and gas block.

Or a parts kit wouldnt hurt either. I am just trying to build a cheap AR-15.

[IHaveAMustang]

Motoman ran across one yesterday. I'm not sure why you would want to shoot corrosive ammo through an AR-15 though.

SUPER cheap plinking gun. I can swap the upper to .223 whenever I want to shoot some of my brass. I am used to the clean up procedure after shooting, I have to strip my Bulgy AK-74 down and clean it with hot water / soap after ever range trip. I don't mind, just the price to pay to shoot spam cans full of ammo at like .13 cents a round.

[IHaveAMustang]

Thanks Motoman and Bronco. I frequent AIM a lot, first time I have seen an 5.45x39 BCG

[CJ]

SUPER cheap plinking gun. I can swap the upper to .223 whenever I want to shoot some of my brass. I am used to the clean up procedure after shooting, I have to strip my Bulgy AK-74 down and clean it with hot water / soap after ever range trip. I don't mind, just the price to pay to shoot spam cans full of ammo at like .13 cents a round.

Yeah that makes sense, if you don't mind the scrubbing.

[Brandon-k]

SUPER cheap plinking gun. I can swap the upper to .223 whenever I want to shoot some of my brass. I am used to the clean up procedure after shooting, I have to strip my Bulgy AK-74 down and clean it with hot water / soap after ever range trip. I don't mind, just the price to pay to shoot spam cans full of ammo at like .13 cents a round.

My Polish Tantal gets the same treatment after range trips. First (and only) time I left it dirty the damn muzzle brake didn't want to let go of the barrel threads. Now I just spray it down with windex, remoil, and give it a good stroking.

[IHaveAMustang]

My Polish Tantal gets the same treatment after range trips. First (and only) time I left it dirty the damn muzzle brake didn't want to let go of the barrel threads. Now I just spray it down with windex, remoil, and give it a good stroking.

Happy ending?!

[Brandon-k]

Happy ending?!

Always.

[Mr_Fiux]

My Polish Tantal gets the same treatment after range trips. First (and only) time I left it dirty the damn muzzle brake didn't want to let go of the barrel threads. Now I just spray it down with windex, remoil, and give it a good stroking.

Wait... the muzzle brake is detachable on a CAI polish tantal?

[soap]

But he's looking for a complete upper. You're still shy a barrel, nut, handguards, gas tube and gas block.

Got it!!
I purchased mine a already had hand gards. And barrel.

[Brandon-k]

Wait... the muzzle brake is detachable on a CAI polish tantal?

Yes sir. One of these.

[8mpg]

isnt exactly cheap...but a good deal on Spikes stuff

http://www.aimsurplus.com/product.aspx?item=XSTU5050MLSDC&name=Spikes+Tactical+14.5%22+Lightweight+5.56%2f.223+DynaComp+Upper+Receiver&groupid=55

[Mr_Fiux]

Yes sir. One of these.

They screw out to the left or right?

Oh shit that is right. If i take it out I need to put another american made muzzle break since it won't be 922r compliant

[CJ]

They screw out to the left or right?

Oh shit that is right. If i take it out I need to put another american made muzzle break since it won't be 922r compliant

The only time a muzzle break is pinned is when the barrel itself is less than 16". There are 20 things that you can use. if you switch to a tapco magazine, you can put 3 imported parts on it for instance. If CAI shipped with a US magazine, you could be in violation now with those bakelite mags. CAI usually omits them from 922r though.

[Brandon-k]

They screw out to the left or right?

Oh shit that is right. If i take it out I need to put another american made muzzle break since it won't be 922r compliant

It's reverse threaded with the front sight indexing notch. My tantal came with one metal surplus mag and another plastic mag with a raised 2 at the bottom on the left side. No other markings but it does look like it's a Tapco product.