Trade/Barter thread

[Gtracer]

Wasn't sure where else to post this so I figured here would be good.

Recently picked up a good deal on a used Glock 17 from a buddy of mine. Only complaint was that it only had two 10 round magazines so I was in need for some high cap mags. Found this deal pop up from Arms Unlimited that I've frequently been buying stuff from (most recently a Trijicon ACOG).

Buy 5 or more mags and the price drops to $11 each and it also qualifies for free shipping. $55 shipped for 5 mags.

https://www.armsunlimited.com/Magpul-PMAG-GL9-9mm-17-round-Magazine-GLOCK-G17-p/mag546.htm

I've never used Magpul Glock mags but I couldn't find anything bad about them and they make a quality product. Was also planning on buying round extenders and read that Zev makes a +5 for the Magpul Glock mags which I may try a couple of.

They work great in my glock 9mm lower, have 4 so far.

[shumpertdavid]

Rather sell $450 but will entertain trades. I'm not a black powder shooter.

Pedersoli Howdah Hunter in 20 gauge, double barrel, percussion cap, smooth bore pistol with holster. There is some surface rust in the bores but nothing heavy, and small rust spots along the barrels as well. Appears to have never been shot, I have the box and original receipt from the purchase in January 2012.

David 903 819 6430 located near Whitesboro, tx

[IMG][/IMG]

[Jose]

Wasn't sure where else to post this so I figured here would be good.

Recently picked up a good deal on a used Glock 17 from a buddy of mine. Only complaint was that it only had two 10 round magazines so I was in need for some high cap mags. Found this deal pop up from Arms Unlimited that I've frequently been buying stuff from (most recently a Trijicon ACOG).

Buy 5 or more mags and the price drops to $11 each and it also qualifies for free shipping. $55 shipped for 5 mags.

https://www.armsunlimited.com/Magpul-PMAG-GL9-9mm-17-round-Magazine-GLOCK-G17-p/mag546.htm

I've never used Magpul Glock mags but I couldn't find anything bad about them and they make a quality product. Was also planning on buying round extenders and read that Zev makes a +5 for the Magpul Glock mags which I may try a couple of.

[Aceman85turbo]

WTT Steyr M9a1 Gen 2 and 3 mags for m&p 9 5"

[shumpertdavid]

It's a non threaded version

[01yz2nv]

Do you have the thread adapter for the barrel?

[shumpertdavid]

WTT/WTS PARTS for Chiappa / Citadel 1911-22. I have 3 magazines, and basically everything but the receiver/frame if anyone has one and wants extra parts. The frame has damage and Chiappa said its not repairable or wartantied. David 9038196430

[Darren M]

For Sale: AR15 pistol upper in 9mm. $600 (obo), USPS Money Order, PayPal Gift, Bit/alt coins, and of course cash accepted.
(LOWER NOT INCLUDED!)

Eight-One-7-Seven-9-three-Eight-2-Four-1

This has been a fun kit with only a couple of hundred rounds down it. However, time to let it go to someone else. It utilizes a TAC2-DC quick removal barrel kit with free float hand guard, faux suppressor/flash hider, slick side upper, with BCG and CH, magwell insert (uses Glock 9mm mags), with 9mm stainless barrel, buffer tube, spring, and kit specific buffer.

(Or, buy this, add your own 5.56 components and have a break down AR15 for 1/2 the original price!)

Willing to ship if you're willing to pay shipping but I prefer face to face in Aledo/West Forth Worth. DL/CHL/etc to be provided.

Cross posted, won't "hold it"

I've never had a failure to fire or eject. Included is a combination locked briefcase with padded foam.

No markings on BCG, CH, or upper.

On YOUR lower, simply install the magwell insert, buffer tube, pin on the upper, and start shooting.

Brief Magwell insert install

1. remove bolt catch
2. depress mag catch
3. slide in
4. reinstall bolt catch

Assembled sample


Stowed with your lower

(Yes, it breaks down and fits in a standard briefcase.)

ALL parts provided. Magwell insert, bottom middle. FAKE surpressor.


Parts assembled as much as possible.

[ELVIS]

What are you asking for that strikefire?

$120 sir

god bless.

[CJ]

What are you asking for that strikefire?

[ELVIS]

looking to get a g26 or g19 ideally, but open to offers.


PMC Bronze .223 Remington 55-Grain Full Metal Jacket Boat-Tail--888rds

I also have 4 tapco 30rd mags black $ 10ea
and
3 Troy BattleMags black $12/ea------2 of them are still in the original packaging

Vortex Strikefire Gen 1 --- seen less than 100rds.(with box and paperwork)

insite mx3 tactical illuminator ---seen less than 100rds(with box and paperwork)

Spikes "Punisher" lower with KAK Shockwave brace and buffertube, buffer(spikes st-t2) and spring

Anvil Arms lower and what i believe to be a MOdel 1 Upper Complete AR rife $ Magpul MOE Stock UTG rail

remington 870 20ga like new

god bless

[black2002ls]

I have an ammo can (.50 I think) full of mixed once fired brass if anyone is interested. Mostly 5.56 and 9 MM I believe

[inline 6]

I have some parts for a SBR / Pistol build. They have been assembled once but never fired. All parts in perfect shape.

11.5" adams arms voodoo VDI melonited barrel chambered in 5.56 / .223

carbine length adams arms melonite gas tube

Midwest Industries 10.5" handguard P/N: MI-LWM10G3-BLK

Looking for $250 for it all or trade for .300 / 220gr subs. New purchase price was $370

[Darren M]

Received these in a trade thinking I'd have time to sell them. Well, life has other plans and January looks to be busier than December, for me. My loss, your gain.

New and used Quad rail covers:

• P&S Products 6" - 102 sets of 4/per set (408)
• Knights Armament 6" - 36 sets of 4/per set (144)
• Knights Armament 4" - 10 sets of 4/per set (40)
• Knights Armament 2" - 29 sets of 4/per set (116)

Total of separate rail covers. $250 + Shipping or face to face around Aledo, Tx. (2 boxes)
That's 32₵ PER PIECE!
These sell for $15 a set. I'm sure you can do the math. For those of you who are vendors at gun shows, Ebay, etc, I'm positive you can make a nice profit margin off these. I simply don't have the time.

Paypal, cash, etc ready. Heck, I'll even take Crypto currencies.

(Note, ALL images below show the rails in piled sets of 4 each. I just didn't have the floor space to show all of them 1 by 1.)

P&S Products 6"


Knights Armament 6"


Knights Armament 4"


Knights Armament 2"


All of them. No, my wife wasn't happy.

[CJ]

Anyone have some LPK's laying around?