10/22 mods?

[Boomhauer]

I like the hogue stock it seems to have a better grip to me.

[bottlerocket]

Yeah I can shoot 2 inch groups at 25yrds free hand with 25 rounds as fast as I can pull the trigger. I built this gun for my critter and plinking fun so .5moa is not my goal.

Sounds sweet. I was thinking about that Hogue. How do you like it? Figured it might be a better fit for a bigger guy like me instead of that tiny wood thing on it now. Really small grip

[Boomhauer]

Yeah I can shoot 2 inch groups at 25yrds free hand with 25 rounds as fast as I can pull the trigger. I built this gun for my critter and plinking fun so .5moa is not my goal.

[bottlerocket]

How do you like that TS barrel? Damn nice optics for that gun, but how usable is it? I mean yours looks like its set up rather nicely to shoot ~.5 MOA, but can that scope keep up? Figured the dot would be at least 1 MOA.

[Boomhauer]

Here is my modded 10/22 specs: hogue stock, volquartsen trigger group, tactical solutions barrel, tactical innovations charging handle, Eotech 552 optic, Silencerco Sparrow suppressor, and of course butler creek steel lips magazine.

[WOMACK03]

You can also do the bedding yourself if you read up on it.

THIS!

I used the Volq. bedding\ free-float kit.

Modding guns, like modding cars, can be expensive; but it is worth every penny.

[bottlerocket]

I went with Volquartsen everything. Bedding, tg 2000, extractor, pin , bolt, ect.....
I bought the 10/22T model from a guy on this site, and then went crazy with parts.
I have been very pleased.

Who did your bedding and for how much?

You can also do the bedding yourself if you read up on it. Word case you have to get a new stock...

Oh and damn... unless youre competitively shooting it, I cant imagine buying all Volquartsen parts. Those things are spendy!

[ThreeFingerPete]

Who did your bedding and for how much?

You do realize that some 10/22s shoot .5moa right out of the box with a little trigger work, right?
Bedding your stock, etc doesn't necessarily improve the shooting of your rifle.

[98sohc281]

I went with Volquartsen everything. Bedding, tg 2000, extractor, pin , bolt, ect.....
I bought the 10/22T model from a guy on this site, and then went crazy with parts.
I have been very pleased.

Who did your bedding and for how much?

[WOMACK03]

I went with Volquartsen everything. Bedding, tg 2000, extractor, pin , bolt, ect.....
I bought the 10/22T model from a guy on this site, and then went crazy with parts.
I have been very pleased.

[ThreeFingerPete]

Ok so my previous statement is incorrect and it would be worthless at 50 yards...

amateur

[bottlerocket]

4 inches low at 100, 2 inches high at 50. 20 should be pretty close to flat.

Ok so my previous statement is incorrect and it would be worthless at 50 yards...

[Neighbors]

FWLIW, I added Tech-Sights aperture sights to both of mine, and like them! I have a hard time focusing (it's hell getting old!), but have shot pretty well with them (nothing like lack of data, eh?)...

[motoman]

Does that empty the mag when you pull the trigger (continuous fire) or is it auto bursts depending upon trigger pull?

It does neither, this allows you to pull the charging handle back and let go in order to close the bolt, where normally you have to pull the charging handle back and press the bolt release down in front of the trigger.

Watch from 8:20 and on to see the final product.

Here's what you're doing to the piece that is being modified. You can buy this pieces after market but there's no point when you can do it yourself.




I've seen the full auto modifications but I've no clue what mods are done to those.

[95DRGT]

Not sure if it's me, my iron sights, or something else but I've put close to 500 rounds through my rifle and I find it shoots to the left. Trying to figure out why.


Here's an easy free mod that CJ told me about.

Does that empty the mag when you pull the trigger (continuous fire) or is it auto bursts depending upon trigger pull?