My DMR/SPR build

[YALE]

I can't get it to not cycle again, and this time I used three different brands of ammo, including the original load. I'm blaming myself for the malfunction. I must've been resting it on the mag, or something.

[Fatass]

Mystery malfunctions are great arent they.. good looking gun. What mags are you using? I've got a 20rnd promag that was a piece of shit till i took it apart and cleaned it (new).

[YALE]

Mystery malfunctions are great arent they.. good looking gun. What mags are you using? I've got a 20rnd promag that was a piece of shit till i took it apart and cleaned it (new).

Just 30 round pmags. That bipod is crap, which made it difficult to use, and the range I was at didn't have sandbags, so I'm sure as the heat and mosquitos distracted me, I rested the gun on the mags. I went to a better range today, and it worked fine.

[bobs94formula]

Very nice looking rifle!

[YALE]

Thanks, man!

[Fatass]

Pick up some 10 or 20's, I usually just take 20's when I go to the range just for the reason of not having the mag hitting the bench.

[YALE]

Yeah, they're on the list, for sure.

[futant]

how you gonna get cheek weld with scope so high?

[YALE]

how you gonna get cheek weld with scope so high?

The eye relief is the annoying part about it, believe it or not. It's fucking impossible to get perfect.

[ThreeFingerPete]

it's because your scope needs to be about 1.5" further forward and sunk as close to the rail as possible.

http://www.laruetactical.com/larue-tactical-spr-m4-scope-mount-qd-lt-104

http://www.rainierarms.com/?page=shop/detail&product_id=1525

[YALE]

it's because your scope needs to be about 1.5" further forward and sunk as close to the rail as possible.

http://www.laruetactical.com/larue-tactical-spr-m4-scope-mount-qd-lt-104

http://www.rainierarms.com/?page=sho...roduct_id=1525

That larue mount is the same height as these TPS rings.

[ThreeFingerPete]

Move the scope forward a few notches (this will mean clamping the scope ring onto the quad rail. See how it works. You probably need a cantilever mount.

[YALE]

Move the scope forward a few notches (this will mean clamping the scope ring onto the quad rail. See how it works. You probably need a cantilever mount.

Roger/wilco.