86 GT LSX Turbo Main Build Thread

[Baron Von Crowder]

A console delete bezel?

both of them.

[Cobraman]

It runs bitches!!!

[Tremor14]

congrats!

[BlueCoupeRedVert]

Anyone need an LS swap done?? Lol

[Cobraman]

[Sleeper]

Anyone need an LS swap done?? Lol

I need money to finish mine. Would you like to be a sponsor.

[Cobraman]

It is getting taken to the exhaust shop on tuesday since i'm on vacation. Then it will get taken back to James for a full tune.

[BlueCoupeRedVert]

I need money to finish mine. Would you like to be a sponsor.

Lol, definitely not a sponsor...gotta get my own stuff back together now.😉

[CRASH]

Keep me in mind on the alinement. Like i said with the same set up and my crude gauge i cant quite get it to where i want. I want to see the specs.

That car aligned perfect and the guy didn't have a single problem getting it into spec so I'm wondering why your car is so far off, Jason. Did you say it doesn't have an engine in it yet?

[Sleeper]

I made the friends with the alinement shop guy. If I can't get it to where I want with max caster and zero camber. I'm putting the stock spindles back on and buying some aerospace brakes that also bring the wheel in 3/4 inches.


I'm 99 percent sure our strut towers are the same. I just want to see how they set it up since we have basically the same setup.

[Cobraman]

I made the friends with the alinement shop guy. If I can't get it to where I want with max caster and zero camber. I'm putting the stock spindles back on and buying some aerospace brakes that also bring the wheel in 3/4 inches.


I'm 99 percent sure our strut towers are the same. I just want to see how they set it up since we have basically the same setup.

With the aje k member we are out of tie rod adjustment and the wheels are still pigeon toed a bit. Going to have to figure something out :\

[Sleeper]

Team z bumpsteer kit for the shorter a arms. What rack does it have and what's it measure end to end

[BlueCoupeRedVert]

Its coming down off its perch Saturday.. Then i can get a better idea of how far its off.. Bump steer kit would be nice but not in the budget right now.. If needed i can space the rack out a hair.

[Sleeper]

I was pissed at flaming river. Their rack is shorter by a inch vs a regular mustang rack. When i got mine it was advertised the same but now they have it changed. So i had to buy crap twice.

My problem was the opposite. Not enough thread engaugement.

[Sleeper]

6 inches overall and 5 1/8 from center of ball. 2 3/4 thread depth.



If they will work i have brand new tie rod ends that come with the flaming river manual rack kit. Cover shipping and you can have them.