Holley Dominator EFI

[greenbullitt]

This is about where I am getting tripped up. But I am only working with theory on my computer right now.

Have you hit up their forum? There is a Danny guy that is extremely helpful on there.

no, but I definitely will.

i am tying up fans, boost control etc right now

[KBScobravert]

im not so worried about the software, the install is the learning curve moreso imo.

the instructions are very lacking in the inputs/outputs section. I am installing one as we speak. It runs, but not done just yet.

This is about where I am getting tripped up. But I am only working with theory on my computer right now.

Have you hit up their forum? There is a Danny guy that is extremely helpful on there.

[greenbullitt]

Thanks guys. Now I need to hurry home and sell a bunch of parts before my wife finds out.



I have the software on my laptop here in Afg. and have been playing with it. So much easier than the AEM I am going from.

I know a few folks have it here on the board. Have you had a chance to fiddle with one?

im not so worried about the software, the install is the learning curve moreso imo.

the instructions are very lacking in the inputs/outputs section. I am installing one as we speak. It runs, but not done just yet.

[KBScobravert]

Thanks guys. Now I need to hurry home and sell a bunch of parts before my wife finds out.

get ready keith, its a learning experience!

I have the software on my laptop here in Afg. and have been playing with it. So much easier than the AEM I am going from.

I know a few folks have it here on the board. Have you had a chance to fiddle with one?

[greenbullitt]

get ready keith, its a learning experience!

[Sleeper]

Thats freaking awesome.

[Lason]

Baller!

Those dominator setups seem real solid from what I have read and plenty of inputs on the dominator.

Sent from my SAMSUNG-SM-N900A using Tapatalk

[KBScobravert]

The only thing this ECU lacks that went into the con column (vs the Haltech who got the W for this) is that it is not compatible with a ethanol fuel sensor. It can read and log one but it will not adjust the tune to meet the ethanol content. No worries, different tunes for different fuels and lock them out with the key switch.

[KBScobravert]

Just placed the order for the whole lot.

I am replacing the AEM ECU, AEM Injector Driver, AEM EPM (cam/crank sensor) entire ECU and Injector harnesses, boost solenoids and a few other items.

Going with the Holley Dominator EFI ECU, hand held touch screen monitor, the Holley harnesses, boost solenoids, Ford Explorer cam sensor and a crank sensor on a wheel.





I am expecting this ECU to do everything to include monitoring air temps pre and post intercooler, turn on the water pump for the air to water, monitor the oil temps pre and post oil cooler and turn on it's fan, monitor boost obviously and turn on the electric vacuum pump, run fan speeds, monitor coolant temps pre and post radiator just for shits and grins, and if I can get a drive by wire throttle body under the hood - control cruise control.