I seem to be having problems getting the front end aligned. I took it to NTB, gave them a couple shots at it. IDK if the kid just doesn't know what he is doing on a lowered 03 cobra but its not right. Anyone have a guy that's really good with this type of work around ft worth-weatherford area?
Announcement
Collapse
No announcement yet.
Front wheel alignment?
Collapse
X
-
The plates could be on backwards. This limits the range of adjustment in one direction only but will still allow a small amount of adjustment, which is probably why you could get the alignment right before adjusting ride height but not after.Originally posted by C_J View PostThanks, Ill give him a call. The kid at NTB was trying to tell me my caster/camber plates were on backwards... I tried to tell them the alignment was fine before I adjusted ride height on the coil overs...
Comment
-
If you're talking about Maximum Motorsports, the plates do flip over to allow for 2 different ranges of camber settings, but that makes no difference on the caster.Originally posted by C_J View PostHe was saying the caster, they are M
&M plates.
PM SENT
What was he trying to set the caster to? On these cars it's good to run some positive caster for both cornering and straight line stability. MM recommends 3.6 positive caster for street cars.Atlantic Blue '00 - '03 Cobra motor and TKO600, solid axle, full MM suspension
Silver '01 Vette - D1 blown LS
Comment
-
Yes they are maximum motorsports. Ill keep that info in mind, I have no idea what he was trying to set for sure, he just kept saying he couldn't get one of the casters in spec. he was probably setting it to the specs in the computer for the stock cobra.
I guess I wrote it and never sent it... PMing againQuote:
Originally Posted by C_J View Post
PM SENT
Did not get it
Comment
-
Has the car ever been wrecked?Originally posted by C_J View PostYes they are maximum motorsports. Ill keep that info in mind, I have no idea what he was trying to set for sure, he just kept saying he couldn't get one of the casters in spec. he was probably setting it to the specs in the computer for the stock cobra.
I guess I wrote it and never sent it... PMing againAtlantic Blue '00 - '03 Cobra motor and TKO600, solid axle, full MM suspension
Silver '01 Vette - D1 blown LS
Comment
Comment