Poll: 76mm Turbo or Heads/Intake?

[90GT50]

None intercooled 5-6lbs of boost and it would run fine and would spool real quick

Yeah, but it'd be out of steam pretty quick, too.

[majorownage]

I lol'd. A .48 is too small even on a little 2.4.

None intercooled 5-6lbs of boost and it would run fine and would spool real quick

[slownbmta]

57 trim with a .48 is WAY to small even for twins. on your motor even 4 of them would stil be small-ish

they will support about 230whp each and you will have no high rpm power. nothing like twin turbocharging your car and going slower.

precision makes the best street turbo's for a budget based build

They might not be what the guy needs.....but you are full of shit. They are rated at 500fw each. He just has a stock 6.0.... They made 800rw on my 03 Cobra and they weren't maxxed out yet. He probably makes 350-400rw so if he could get a solid 10-12lbs of boost he would easily meet his goals....

[90GT50]

I should listen to you, the guy telling the OP to install .48 housings on a 3.1L bank of cylinders.

I lol'd. A .48 is too small even on a little 2.4.

[Big Thumper]

I think you need to fine tune what you have.....

[barronj]

I should listen to you, the guy telling the OP to install .48 housings on a 3.1L bank of cylinders.

I don't know jack about turbos, but I know a burn when I see one.

/back to the bench.

[Mysticcobrakilla]

I say turbo.

Your friggin car has me thinking of doing a turbo lsx I my turd.

[Aceman85turbo]

Precision is trash.

I should listen to you, the guy telling the OP to install .48 housings on a 3.1L bank of cylinders.

[majorownage]

57 trim with a .48 is WAY to small even for twins. on your motor even 4 of them would stil be small-ish

they will support about 230whp each and you will have no high rpm power. nothing like twin turbocharging your car and going slower.

precision makes the best street turbo's for a budget based build

Precision is trash.

[Aceman85turbo]

57 trim with a .48 is WAY to small even for twins. on your motor even 4 of them would stil be small-ish

they will support about 230whp each and you will have no high rpm power. nothing like twin turbocharging your car and going slower.

precision makes the best street turbo's for a budget based build

[SNEAKY]

i would normally say boost it. but a heads cam LSx is pretty stout.

[dville_gt]

Tial makes ex housings. See if you can get the turbos for a good deal

from what i can tell you are looking at around 300 a pop. kinda pointless on a turbo that cost 700 new.

[majorownage]

too small for a 364ci. guy i talked to with the same turbo's w/a .63 exhaust housing was running out of steam on a 346ci ls

Tial makes ex housings. See if you can get the turbos for a good deal

[dville_gt]

do eet!

too small for a 364ci. guy i talked to with the same turbo's w/a .63 exhaust housing was running out of steam on a 346ci ls

[FRANCISCO308]

twin garrett t3/t4 57trim .60ar compressor .48ar turbine

Jay from Hpp has small turbos on his car and it makes sick power.