new car i picked up lots of tech questions will follow

[Blackpony]

Pm me ur number I'll send you sOme.

[TEAMJACOB]

get the tag off the trans and it will tell you what it is....

Wanna trade for an old 67 mustang? I'll even mess with getting it running... Lmk

Pics?

[Blackpony]

Wanna trade for an old 67 mustang? I'll even mess with getting it running... Lmk

[TEAMJACOB]

get the tag off the trans and it will tell you what it is....

Ill look first thing tommorrow

[greenbullitt]

get the tag off the trans and it will tell you what it is....

[TEAMJACOB]

If you have an old distributor pull everything off the top. They work great with a drill attached as an oil priming tool.

I don't know how to do this. Also I need a battery if someone wants to get rid of one on the cheap

[85turbocoupe]

What exactly is recommended for starting a car that hasn't been started in 3 yrs.
Change oil, drain gas, change plugs, what else? How about lubing the cylinders somehow?
Car has a built fresh motor, afr 165s that have been worked, gt 40 lower, rap box upper, 24 lb injectors, 255 pump, bbk 75mm tb, bbk long tubes, msd cap and rotor, h pipe, flows, full length sub frames, I know it has springs shocks struts upper and lower control arms but I have to check the receipts that came with it, alumin drive shaft, 410s, 3 gauge pillar, phantom gauges, monster tach with shift light, electric fan with controller, cd player, 9.9 out of 10 original black interior, new tires, fair pony's and more that I just don't know the specs on till I pull the valve cover or check the receipts like the roller rockers, push rods, forged pistons, girdle,etc. Will be for sale soon

If you have an old distributor pull everything off the top. They work great with a drill attached as an oil priming tool.

[TEAMJACOB]

Cool. Well hopefully its in the big ass pile of receipts.
Also, the car has afr heads and 24lb injectors but has a stock mass air. How is this thing running and how much better would it run with a bigger one?

[91CoupeMike]

FYI: Borg Warner still had world class, and really if it's been rebuilt it can be anything.

Maybe even a z spec.

[91CoupeMike]

Also how can I tell if its a world class t5 its suppose to have a brand new one or less than 5k

World class is all internal, from the outside it will look the same.

I think the 87-93 cars came with world class from the factory.

Had better bearings and could hold a little more torque.

Early t-5 will be marked with Borg Warner, later/new ones will marked tremec.

[TEAMJACOB]

Also how can I tell if its a world class t5 its suppose to have a brand new one or less than 5k

[91CoupeMike]

Change oil, plugs, wires, fresh gas, Fuel and air filter, let it rip.

If it runs good, flush the coolant system.

Check trans fluid too.

[TEAMJACOB]

What exactly is recommended for starting a car that hasn't been started in 3 yrs.
Change oil, drain gas, change plugs, what else? How about lubing the cylinders somehow?
Car has a built fresh motor, afr 165s that have been worked, gt 40 lower, rap box upper, 24 lb injectors, 255 pump, bbk 75mm tb, bbk long tubes, msd cap and rotor, h pipe, flows, full length sub frames, I know it has springs shocks struts upper and lower control arms but I have to check the receipts that came with it, alumin drive shaft, 410s, 3 gauge pillar, phantom gauges, monster tach with shift light, electric fan with controller, cd player, 9.9 out of 10 original black interior, new tires, fair pony's and more that I just don't know the specs on till I pull the valve cover or check the receipts like the roller rockers, push rods, forged pistons, girdle,etc. Will be for sale soon

[crapstang]

I like the black interior

[TEAMJACOB]

Please don't move to pic and video because I have ton of tech questions. But here is a quick pic and will get more soon.