Announcement

Collapse
No announcement yet.

compressor cycling what could it be

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • compressor cycling what could it be

    On an import too.

    Compressor cycles and blows hot and cold air mostly hot.

    Psi on Freon is 55

    Fuses are ok as well

    So is the ac relay

    What else could it be?

  • #2
    Is 55 PSI the static pressure or the low side when the system is running?

    If static, I guarantee you that the system is undercharged, causing a quick cycling issue. If it is low, then you would have to find the leak in the system and fix that before recharging. Otherwise, you will be looking at wasting freon and money.
    كافر

    Originally posted by sc281
    Always better to be an Uncle than a Father. All the fun stuff and none of the expensive stuff.
    Originally posted by Trick Pony
    ...from what I've seen on here bcoop knows his shit when it comes to smoking meat.

    Comment


    • #3
      What HOOCBB said. It could also be a screwed up/plugged up expansion valve if your pressures are actually good. I've worked on a few import cars that had that as the issue.
      2004 Suzuki DL650
      1996 Hy-Tek Hurricane 103

      Comment


      • #4
        Low side with car running wc on full blast

        Car only has 34k miles and is 08 g37 will that help?

        Comment


        • #5
          Just because you have 55psi on the low side doesnt mean you have enough freon in the system. Check it for leaks.

          Comment


          • #6
            Put a shot of the uv dye in there and checked it for leaks last night just got back from driving it and still no leaks that the uv light can see

            Comment


            • #7
              Now its blowing ice cold driving 75 on the highway I'm totally lost on this car when it was hot last night it blew hot now that its darker with no sun it blows ice cold what could be causing that?

              Comment


              • #8
                Blend door not working correctly?

                Comment


                • #9
                  Originally posted by Sleeper View Post
                  Blend door not working correctly?

                  Wouldn't that cause the ac not to blow at all?

                  Comment


                  • #10
                    Check the pressure switch could be faulty causing the compressor to cycle on and off. If it's blowing cold sometimes then it has enough freon.
                    http://DallasGunTrader.com

                    Comment


                    • #11
                      If compressor cycles on and is still blowing hot air, then you probably have a actuator bad/or hose leaking vacuum.
                      http://DallasGunTrader.com

                      Comment


                      • #12
                        Do different temperatures outside affect the ac system? Like its nipple cold right now with no sun and 78 outside it gets down to 59 out the vent but a few hours ago in 90 degree weather the tcoldest it got blowing out was 68 and hottest was 89

                        Comment


                        • #13
                          heater water shutoff valve

                          Originally posted by 03mustangdude View Post
                          Do different temperatures outside affect the ac system? Like its nipple cold right now with no sun and 78 outside it gets down to 59 out the vent but a few hours ago in 90 degree weather the tcoldest it got blowing out was 68 and hottest was 89
                          some cars have them, others don't. some ac units control the waterflow to the heater with a shutoff.
                          Don't worry about what you can't change.
                          Do the best you can with what you have.
                          Be honest, even if it hurts.

                          "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; Its inherent virtue is the equal sharing of misery" ... Winston Churchill

                          Comment


                          • #14
                            How's about those fans working or not? Could be issue with airflow across condenser. Also discharge ( high side)readings are what?

                            Comment

                            Working...
                            X