Any advise on who to get injectors from for a cummins? Had 1 or more shit the bed and going to replace all. Truck is a 06 with 114k ish on it. Old quadzilla box(60,90,175 settings I believe), 5in turbo back, volant cold air and is a 2wd. Looking for either stock or slight upgrade. Any word on Industrial Injection?
Announcement
Collapse
No announcement yet.
Cummins injectors attn**cooter or Paul
Collapse
X
-
I wouldn't use Industrial.
Either bosch factory remans or Exergy if you want aftermarket
-
I am assuming it is the only problem. Started running rough on the hgwy. noticed some smoke, not from tail pipe. Drove probably 8ish miles total but noticed my fuel disappeared fast. Like a 1/4 tank in that many miles. Was blowing oil/fuel out blow down tube like a freight train. Drained oil after getting towed and had about 10 gallons of oil gas mix in it. It sounds ok right now but has a really noisy injector and if Im changing 1 Im doing 6,.Originally posted by greenbullitt View PostWas that the only prob?
Comment
-
I know where DAP gets their injectors. I can get you the same ones for $1500/set, but I would only install them to trade in a truck or send it to auction.
I can get Bosch remans for $1800/set
Comment
Comment