Question for the racers who turn

[Kart21]

you forgot all the reinforcement to the strut tower and camber plate after they are beaten into the hood!

x2

Had issues with this untill I reinforced the car.

[aggie97]

Hey Matt do you have scales? When ever the day comes that my Mach is done I need to get it weighed so I can do just this. I have all MM panhardbar/torque arm and 4 corner coil overs but I need to check if the spring rates on the car are correct.

I do. I'm also moving to a bigger shop over the holidays and into January. I'm going to start doing more side work so feel free to give me a shout after the first of the year if you are in the area for a TWS weekend.

[Super Coupe]

Hey Matt do you have scales? When ever the day comes that my Mach is done I need to get it weighed so I can do just this. I have all MM panhardbar/torque arm and 4 corner coil overs but I need to check if the spring rates on the car are correct.

I have a set of scales I use for my racecar. Just hit me up when you are ready.

[Grape]

scales are only as good as the floor they are sitting on

[aggie97]

scales are only as good as the floor they are sitting on

The racing surface is worse than any floor I use! Besides, I have leveling plates under the scales

[Super Coupe]

The racing surface is worse than any floor I use! Besides, I have leveling plates under the scales

You should see the junk I race on. My garage floor works well enough for me. Plus sometimes there's atleast an extra 100 pounds of mud on my car after a race on a tacky track.