Lincoln/Ford Y block guys come inside!!

[Baron Von Crowder]

yeah no shit. I kinda wanted to come check it out, and dropping off a carb wouldnt be a bad excuse, but fuck 2 hours of driving.

[mk5.0]

Hell ya...where are you located? Also how long has it been since you pulled it off?

I'm out in rockwall, I pulled it off about a year ago.

[MGannaway]

yeah no shit. I kinda wanted to come check it out, and dropping off a carb wouldnt be a bad excuse, but fuck 2 hours of driving.

Come out this weekend. 2 hours isnt really that bad. I'll supply the beer

[MGannaway]

I'm out in rockwall, I pulled it off about a year ago.

Let me know when a good time is for you for me to come pick it up.

[Baron Von Crowder]

Come out this weekend. 2 hours isnt really that bad. I'll supply the beer

doubt it.

[Falcongunner]

Have yours rebuilt if you cannot find one. The HD truck may have a different bellhousing requiring a different starter or bendix drive.

I have used Fort Worth Generator and Starter in the past to rebuild old starters and generators.

Fort Worth Generator and Starter


308 N Sylvania Ave, Fort Worth, TX 76111

(817) 834-0709

[MGannaway]

Have yours rebuilt if you cannot find one. The HD truck may have a different bellhousing requiring a different starter or bendix drive.

I have used Fort Worth Generator and Starter in the past to rebuild old starters and generators.

Fort Worth Generator and Starter


308 N Sylvania Ave, Fort Worth, TX 76111

(817) 834-0709

awesome thanks I will definitely call them if the one from oriellys isnt correct

[mk5.0]

Let me know when a good time is for you for me to come pick it up.

I will have to pick it up from my dad's house this weekend. I will give you a shout once I get it.

[MGannaway]

I will have to pick it up from my dad's house this weekend. I will give you a shout once I get it.

sounds good. thanks

[Cooter]

doubt it.

allow me to translate...

"fuck. yo. beer. nigga!"

[MGannaway]

Got my new starter. Problem though is its not going in and seating flat.

[Back N Black]

Shaft looks longer...I'm thinking the different bell housing guess from earlier is spot on.

[MGannaway]

Shaft looks longer...I'm thinking the different bell housing guess from earlier is spot on.

Yup so I made a hybrid of the old and new. I cleaned the armature and used all the new brushes and magnets. But here is a pic of the starter now installed. It looks like the gear is already engaged to the flywheel. I am not sure if the old bendix is messed up or if that is how it is supposed to be. OR maybe it wasn't the right starter either. Hell if I know now.

[MGannaway]

Well it worked. A jumper cable straight to the starter made it hum right along.

[black2002ls]

Well it worked. A jumper cable straight to the starter made it hum right along.

Heh, may not have needed a new starter after all!

Good to know that the majority of it is new now anyway