Balancing a 331

[89cleanstang]

Just curious what most people have balanced a 331 stroker to. If it was 28 oz or 50 or ? I'm getting it balanced at a machine shop and seen where a 28 oz is easier. Just looking for some advice

[Lone Sailor]

I did mine at 28. Didn't have any issues. Just make sure your flywheel is also balanced for the same weight.

[Mach1]

Just comurious what most people have balanced a 331 stroker to. If it was 28 oz or 50 or ? I'm getting it balanced at a machine shop and seen where a 28 oz is easier. Just looking for se advice

What is the crank rated for at what bob weight? Lower is better, 50oz imbalance sitting that far in front of the #1 main journal sucks.
50oz<28oz<0oz

[89cleanstang]

Any brand yall recommend? I really wanna go with a 0 balance. Just want a good solid and fun car plus the blocks are shit up to a certain power range. Figured the balance would help

[jyro]

The svo, I think it's romac

Any brand yall recommend? I really wanna go with a 0 balance. Just want a good solid and fun car plus the blocks are shit up to a certain power range. Figured the balance would help

it has a bolt on weight to zero balance with the weight off. looks like this one on ebay

http://i.ebayimg.com/00/s/NTgxWDcxMQ...S7v0d/$_12.JPG

[Mach1]

Any brand yall recommend? I really wanna go with a 0 balance. Just want a good solid and fun car plus the blocks are shit up to a certain power range. Figured the balance would help

If it's a 50oz crank @ 1900g bob weight and you are still at 1900g it's going to take a LOT of heavy metal $$$$ to 0 balance it out, you need to figure out what the "spec" is on the crank and go from there. If it's a 28oz crank @ 1900g and your BW is 1700g it would be much easier.