High offset wheels on a fox

[TX21]

What is need to put wheels from a 2005+ (44mm offset) on a fox (92 to be exact)? I am sure its been done but I can't find anything on it. Seems with the higher offset I am going to need longer axles I guess. Not sure about the spindles though.

[homealone]

SN95 stuff, front and rear. Nothing more, nothing less.

Actually, it doesn't, don't waste your time.

[TX21]

hhmmmm. So sn95 axles for the rear?

[90GT50]

What Wheels are +44 offset on 2005+ Mustangs?

[TX21]

I think its a 2010 wheel 18x8

[homealone]

hhmmmm. So sn95 axles for the rear?

Yes w/ brakes.

What Wheels are +44 offset on 2005+ Mustangs?

I know the Bullitts are too.

[TX21]

Yes w/ brakes.



I know the Bullitts are too.

Shit thats gonna be a lot more work. Guess I have to do the disc brakes all the way around with the booster, master cylinder, prop valve. Then I bet I can't put the center cap in the fronts.

[Chili]

Shit thats gonna be a lot more work. Guess I have to do the disc brakes all the way around with the booster, master cylinder, prop valve. Then I bet I can't put the center cap in the fronts.

Homealone has his centercaps on in front.

[ELVIS]

all said and done prolly cheaper and certainly easier to buy correct wheels.

god bless.

[TX21]

Homealone has his centercaps on in front.

Those high offset wheels don't have much room behind the center cap area. At least on all the Mercedes ones I have messed with. I guess I have to take the plunge and see what its going to take by just doing it.

[dumpycapri85]

SN95 stuff, front and rear. Nothing more, nothing less.

Actually, it doesn't, don't waste your time.

I think this is the first car I have seen with those rims that didn't look like crap . I don't even like them on the year they came on but they look pretty good on that fox .

[TX21]

all said and done prolly cheaper and certainly easier to buy correct wheels.

god bless.

I agree but I don't want any of the wheels that I have seen. I think the 05+ stuff looks bad ass so I really want to go that route. Just don't want to spend $1500 getting the 5 lug crap and then have to buy wheels.

[homealone]

Shit thats gonna be a lot more work. Guess I have to do the disc brakes all the way around with the booster, master cylinder, prop valve. Then I bet I can't put the center cap in the fronts.

There are no issues with center cap fitment when you use the SN95 assemblies. In fact, you can make Mark VII/Ranger/SVO rotors work with some massaging. If you don't want to run 4 wheel disc, use the Ranger axles out back with a 1" spacer.

I agree but I don't want any of the wheels that I have seen. I think the 05+ stuff looks bad ass so I really want to go that route. Just don't want to spend $1500 getting the 5 lug crap and then have to buy wheels.

$1500

Where are you pricing the shit? Values are down right now. I was selling this stuff for under $500 when prices peaked.

[homealone]

I think this is the first car I have seen with those rims that didn't look like crap . I don't even like them on the year they came on but they look pretty good on that fox .

It even looks better now. I swapped them out for charcoal. They don't look as washed out against the white.

[TX21]

There are no issues with center cap fitment when you use the SN95 assemblies. In fact, you can make Mark VII/Ranger/SVO rotors work with some massaging. If you don't want to run 4 wheel disc, use the Ranger axles out back with a 1" spacer.



$1500

Where are you pricing the shit? Values are down right now. I was selling this stuff for under $500 when prices peaked.

Yeah that was just a shock factor. I have seen the 50rest kit for $400 just though I would need more than that. I really don't want/need disc out back just because I can do it later when I have more cash.