Wanna stay Jalapeno red on the 86. Who does good work in the DFW area for 1000 or less. Any hookups???
Announcement
Collapse
No announcement yet.
Paint job
Collapse
X
-
is it a sand and shoot or does it need body work?Originally posted by Your Name Here View PostWanna stay Jalapeno red on the 86. Who does good work in the DFW area for 1000 or less. Any hookups???Vortex rear stand $75
8.8 410s. $50
**SKAGG NASTY**
My goal in life is to not arrive at the grave in a well preserved body.
but rather to skid in sideways, totally worn out, shouting "holy shit!!!.. what a ride!"
1990 Foxbody GT for that ass
11
4 door
13 FX2 White 5.0
-
send me detailed pics to camposautorepair@gmail.com and ill see what i can do.
or stop by the shop sometime for the most accurate estimate.
israel
Comment
-
Red paint is very expensive. A complete on a Mustang can be done with 2 quarts of base and that will cost a couple hundred bucks, then add sealer, clear, sand paper, masking paper, tape, compound, primer, etc... see where I am going. You could do it in single stage or maby enamel. Decent base clear you will have at least 750.00 in materials. I don't know anybody that can do a quality job for 250.00 labor.
Comment
-
True this, you get what you pay for.......Originally posted by sdun View PostRed paint is very expensive. A complete on a Mustang can be done with 2 quarts of base and that will cost a couple hundred bucks, then add sealer, clear, sand paper, masking paper, tape, compound, primer, etc... see where I am going. You could do it in single stage or maby enamel. Decent base clear you will have at least 750.00 in materials. I don't know anybody that can do a quality job for 250.00 labor.
Comment
-
Damn, been awhile since ive bought paint, but i did mine with diamont base and dc88 clear for $350 in materials.Originally posted by sdun View PostRed paint is very expensive. A complete on a Mustang can be done with 2 quarts of base and that will cost a couple hundred bucks, then add sealer, clear, sand paper, masking paper, tape, compound, primer, etc... see where I am going. You could do it in single stage or maby enamel. Decent base clear you will have at least 750.00 in materials. I don't know anybody that can do a quality job for 250.00 labor.
Comment
-
Well I have a buddy who will do it, I don't know if he'll do it that cheap, probably cheaper than anyone else. He painted my GT about 11 years ago and I am about to have him paint it again this summer. The only reason it needs repainted is because I have fucked it up over the years, otherwise it would still be good.Originally posted by Your Name Here View PostSand and shoot. Heck could even be some touch ups and clearVortex rear stand $75
8.8 410s. $50
**SKAGG NASTY**
My goal in life is to not arrive at the grave in a well preserved body.
but rather to skid in sideways, totally worn out, shouting "holy shit!!!.. what a ride!"
1990 Foxbody GT for that ass
11
4 door
13 FX2 White 5.0
Comment
-
So you are saying that you can't get a quality paint job (on a sand and shoot) for under 3k ? Not true at all.Originally posted by Cannon View PostI wouldn't trust anyone who quoted me under $3,000. If it's a clean little car don't fuck it up with a shittie ass paint job. Four eyed, t-tops are becoming harder to come by.Vortex rear stand $75
8.8 410s. $50
**SKAGG NASTY**
My goal in life is to not arrive at the grave in a well preserved body.
but rather to skid in sideways, totally worn out, shouting "holy shit!!!.. what a ride!"
1990 Foxbody GT for that ass
11
4 door
13 FX2 White 5.0
Comment
-
To be honest with you, typically when someone say, "oh, its just a sand and shoot", its not really just that. There's usually light shallow dents, door dings, peeling paint and such that the owner never notices. Once you really get looking, its not really and sand and shoot. When I think "sand and shoot", I think disassemble the car, 320 wet/dry sand the car, tape, seal, shoot.Originally posted by Txstang1 View PostSo you are saying that you can't get a quality paint job (on a sand and shoot) for under 3k ? Not true at all.
Comment
Comment