78 fairmont lemons car

[Baron Von Crowder]

[Sleeper]

needs a 5115 kit.

[Denny]

What suspension set up are you using?

[Baron Von Crowder]

What suspension set up are you using?

Stock.

[VaderTT]

Dilly? What are the specs?

[Mach1]

What suspension set up are you using?

Quadrabind supreme racers edition

[Denny]

Stock.

I've got some eibachs in the box, ready to go. The Lincoln had a conversion kit that already had a set of them with it.

[Denny]

Quadrabind supreme racers edition

Fully adjustable?

[Mach1]

Fully adjustable?

Full self adjusting bind, very nice stuff, because racecar.
I've got the same setup on the CMC car, going to a disconnect one of the UCA's and run a PHB next year :-O

[Baron Von Crowder]

Dilly? What are the specs?

Dohc 4.6 from a 95 mark viii. Intake and exhaust manifolds from a 98. T45, 8.8 with 3.55s. Sn95 arms and hubs, cobra front brakes, v6 disks in the back. Running what I think are eibach sn95 convertible springs, poly lower arm bushings, and home boxed arms.

I've got some eibachs in the box, ready to go. The Lincoln had a conversion kit that already had a set of them with it.

Sweet.

I was kinda impressed with the number, the engine came out of a 200+k mile car, and we didn't even change plugs.

Ford advertised it at 280 hp, and we're right on the money with 15 percent subtracted for driveline loss.

[Mach1]

Dohc 4.6 from a 95 mark viii. Intake and exhaust manifolds from a 98. T45, 8.8 with 3.55s. Sn95 arms and hubs, cobra front brakes, v6 disks in the back. Running what I think are eibach sn95 convertible springs, poly lower arm bushings, and home boxed arms.

Sweet.

I was kinda impressed with the number, the engine came out of a 200+k mile car, and we didn't even change plugs.

Ford advertised it at 280 hp, and we're right on the money with 15 percent subtracted for driveline loss.

That's awesome, you still on the orig swap 4.6?

[Baron Von Crowder]

That's awesome, you still on the orig swap 4.6?

Yeah, still the same engine we swapped in to the mustang, we just transfered it (and everything else) into the mont chassis.

[Denny]

We need vids!

[Baron Von Crowder]

We need vids!

I didnt video the dyno. The first run ( blue line) it was way too smokey, as soon as he hit the button it started spinning the tires on the dyno, I was cracking up.

[Denny]

I didnt video the dyno. The first run ( blue line) it was way too smokey, as soon as he hit the button it started spinning the tires on the dyno, I was cracking up.

I'm talking about track/street vids.