Announcement

Collapse
No announcement yet.

Couple pics of my buddys 393w setup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • fbodyjohnny
    replied
    One more thing, he doesnt have the stock hood.. it's the cobra R just like mine.

    Leave a comment:


  • fbodyjohnny
    replied
    and no,, that car is running 60# injectors.. I said for MY car once I put that vortech on it I'm also putting in 42# injectors, boost timing master, boost reference regulator.. his car wouldn't even run on 42# lol. I wish I coulda got a video of it before we took off the charger..

    Leave a comment:


  • fbodyjohnny
    replied
    he did everything himself, the guys is a total gearhead. ain't one thing he don't know about these things and anything I've ever had a problem with he always has an answer and it's always right. that IS a 393. might not be able to tell from pics but here is an easy way of telling... the intercooler piping, you did notice how it goes UNDER the intake elbow??? yea you wouldn't be able to do that if there was a 302 based motor in there. doesnt sit high enough. as for how clean it is, and picking out the small stuff,, let's see YOUR engine bay.. thought so..

    Leave a comment:


  • forbes
    replied
    what got me was the lack of camber caster plates, and the spray painted red brake lines, dirty ps pump and a few other lack of details. it may very well put out 800, but by looking at the over all whole thing. if i spent enough money to have 800 hp.... i would have enough money to do the rest as well

    Leave a comment:


  • redrocket5.0
    replied
    Somebody get that guy an a/c delete kit. That will get it in the 800's.

    Leave a comment:


  • Jimbo
    replied
    Originally posted by Yale View Post
    800hp on a 14psi V1? And he still hasn't shown you a dyno sheet? Dude, he's yankin' you.
    Its probably got gt40 heads, they make like 650hp NA.

    Leave a comment:


  • YALE
    replied
    Originally posted by 91CoupeMike View Post
    That's no 393.

    393 is 351 base, check out the intake it sits below the hood line. Way to short, doesn't look wide like a 351 either.
    You can get a 351W below the stock hood. It's been done many times. It does look like an 8.2 deck block, though.

    Leave a comment:


  • 91CoupeMike
    replied
    Props though, it looks clean but it isn't what you think it is.

    Leave a comment:


  • 91CoupeMike
    replied
    That's no 393.

    393 is 351 base, check out the intake it sits below the hood line. Way to short, doesn't look wide like a 351 either.

    Leave a comment:


  • matts5.0
    replied
    dont believe a word that guy says..

    Leave a comment:


  • forbes
    replied
    no fukin way. do you know how hard it is to get 500? and costly at that. you can tell by looking it hasn't dumped enough money into it be 800 just by the install.

    Leave a comment:


  • musclestang89
    replied
    393 , with a blower and it only has 42's ? and I remember hearing that it has gt 40 heads? Am I correct?

    Leave a comment:


  • blk93cpe
    replied
    Lol

    Someone is blowing smoke up your ass!!

    Strim specs:
    Vortech V-1 S-Trim Supercharger
    Max Speed: 50000 RPM
    Max Boost: 20 PSI
    Max Flow: 1000 CFM
    Max Power: 680 HP
    Peak Efficiency: 72%
    Last edited by blk93cpe; 07-28-2011, 10:56 PM. Reason: Adding specs

    Leave a comment:


  • YALE
    replied
    800hp on a 14psi V1? And he still hasn't shown you a dyno sheet? Dude, he's yankin' you.

    Leave a comment:


  • matts5.0
    replied
    800? hmmm...

    Leave a comment:

Working...
X