Announcement

Collapse
No announcement yet.

All this talk about racing trucks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • forbes
    replied
    Originally posted by Diabolic View Post
    So you guys with converters in your trucks, can you tow anything at all with them? Well anything over 4500#'s? I had a PI 3000 stall in mine and it overheated the tranny in traffic pulling a 18' trailer with 3 pallets of tile. On the hwy it was cake, but 45 mins of 0-5mph, 5mph-0, etc..............made it get hottttt! I had a big ole 45,000gvw cooler too.
    my stall is only 11.5 inches (kevlar) in diameter, and i run 128k cooler, i wouldn't put 2 people in the back... lol... but it launches like a bitch

    Leave a comment:


  • Pro88LX
    replied
    Originally posted by Chopped54 View Post
    $6500
    5.3L and already has a cam and stall

    Sick truck! Want an LS1 fbody?

    Leave a comment:


  • Diabolic
    replied
    Originally posted by forbes View Post
    i have a 5.3 swb 05 with 3500 stall transgo kit, billet servos,3.73, bolt ons with some head work and mild cam. also a blackbear tune (not mail order) and mine moves pretty damn good for a daily driver truck. to really have fun in one of these a big brake kit is a must
    So you guys with converters in your trucks, can you tow anything at all with them? Well anything over 4500#'s? I had a PI 3000 stall in mine and it overheated the tranny in traffic pulling a 18' trailer with 3 pallets of tile. On the hwy it was cake, but 45 mins of 0-5mph, 5mph-0, etc..............made it get hottttt! I had a big ole 45,000gvw cooler too.

    Leave a comment:


  • forbes
    replied
    Originally posted by vadertt View Post
    Yup, yours is a pretty sweet truck! RST FTW, what's up with that wrecked RST btw?
    it aint wrecked.. it's narrowed from the rear tiire back... areodynamics for right hand turns

    Leave a comment:


  • VaderTT
    replied
    Originally posted by forbes View Post
    i have a 5.3 swb 05 with 3500 stall transgo kit, billet servos,3.73, bolt ons with some head work and mild cam. also a blackbear tune (not mail order) and mine moves pretty damn good for a daily driver truck. to really have fun in one of these a big brake kit is a must
    Yup, yours is a pretty sweet truck! RST FTW, what's up with that wrecked RST btw?

    Leave a comment:


  • joes01bullitt
    replied
    Originally posted by Chopped54 View Post
    $6500
    5.3L and already has a cam and stall

    looks nice!

    wish i had the cash to pick it up!

    fucking wedding!

    Leave a comment:


  • OrangeChevyII
    replied
    My 00 stoped just fine, it was around 550 rwhp on spray.

    Leave a comment:


  • forbes
    replied
    i have a 5.3 swb 05 with 3500 stall transgo kit, billet servos,3.73, bolt ons with some head work and mild cam. also a blackbear tune (not mail order) and mine moves pretty damn good for a daily driver truck. to really have fun in one of these a big brake kit is a must

    Leave a comment:


  • OrangeChevyII
    replied
    That's the one....

    Leave a comment:


  • Chopped54
    replied
    Originally posted by matts5.0 View Post
    how much?
    $6500
    5.3L and already has a cam and stall

    Leave a comment:


  • OrangeChevyII
    replied
    Originally posted by Z06killinsbf View Post
    Orang, are you Jmew from dfwminis?
    No, not a member there.

    Leave a comment:


  • Juiced4v
    replied
    El Es-Juan time?

    Leave a comment:


  • NoClassic
    replied

    Leave a comment:


  • Z06killinsbf
    replied
    Orang, are you Jmew from dfwminis?

    Leave a comment:


  • matts5.0
    replied
    Originally posted by OrangeChevyII View Post
    I know where a clean 03 GMC is if anyone is looking. Rcsb w/5.3 130,000 miles
    how much?

    Leave a comment:

Working...
X