Announcement

Collapse
No announcement yet.

CPU temps have gone up, need suggestions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CJ
    replied
    Originally posted by Tx Redneck View Post
    I'd verify the fan is working properly too. Beyond that, go get an H80i, they're BEASTS! Peep this.
    psh, tec water chiller:



    That's an old computer of course.

    Leave a comment:


  • CJ
    replied
    Yeah, fan on radiator I forgot.

    Leave a comment:


  • Tx Redneck
    replied
    I'd verify the fan is working properly too. Beyond that, go get an H80i, they're BEASTS! Peep this.

    Leave a comment:


  • CJ
    replied
    Originally posted by big_tiger View Post
    Nope
    Well there is a lot of things that can cause this in water cooling. In order of probability: dust in radiator, low water, corrosion or build up in loop/water blocks, pump going out.

    I'm not familiar with these newer sealed units, but I hope they don't mix aluminum and copper. If they do I hope they have additives. Is there a flow meter anywhere on it to test? You can weigh the unit and compare it to other people's and see if it has lost fluid, is there no way to add any?

    Leave a comment:


  • big_tiger
    replied
    Originally posted by CJ View Post
    Oh for sure. The only way to really stop evap is to use copper rigid tubing. Even a nonvisible puncture or porous area would allow the fluid to evaporate. Is your pump louder than it use to be?
    Nope

    Leave a comment:


  • big_tiger
    replied
    Originally posted by Tx Redneck View Post
    Also, how old is the cooler?
    Cooler, little over a year its a H60?

    The ambient temp is close to the same. I did move, but its not like it went from inside to outside. It is a couple of feet away from the HVAC intake vent?

    Leave a comment:


  • CJ
    replied
    Originally posted by Tx Redneck View Post
    They're sealed, but can/do still suffer from mild evap. They use a low permeable tubing, but with any liquid cooling solution, evap can happen.
    Oh for sure. The only way to really stop evap is to use copper rigid tubing. Even a nonvisible puncture or porous area would allow the fluid to evaporate. Is your pump louder than it use to be?

    Leave a comment:


  • Tx Redneck
    replied
    They're sealed, but can/do still suffer from mild evap. They use a low permeable tubing, but with any liquid cooling solution, evap can happen.

    EDIT: Looks to be an H60. http://www.corsair.com/hydro-series-h60-cpu-cooler.html

    Leave a comment:


  • CJ
    replied
    Oh, you're water cooled, I didn't notice that until I looked. Well, Is that a sealed system or does it have a res?

    Leave a comment:


  • Tx Redneck
    replied
    Also, how old is the cooler?

    Leave a comment:


  • CJ
    replied
    well the obvious question would be to ask about the ambient temperature, any changes?

    Leave a comment:


  • big_tiger
    started a topic CPU temps have gone up, need suggestions

    CPU temps have gone up, need suggestions

    For some reason my CPU core temps have gone up higher than they normally are. Before the PC kept temps under 45*C, and no issues. Now I am at 66*C with a normal load (no games, just web browser, and streaming radio). All of the fans are working, and recently clean the PC out. It has "Filters" so it is really easy. I believe the temp is the issue Im having while playing WOW where the FPS drops suddenly, and come back up. The GPU temp is fine around 36-50*C


Working...
X