Announcement

Collapse
No announcement yet.

3.73s or 4.10s?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3.73s or 4.10s?

    I know its been discussed for the longest time but after reading a lot of threads i still cant decide. 1989 Mustang stock 302 with e303 cam, gt40ps, gt40p lower intake, cai,70mm throttle body and mass air meter, AOD trans, 3000 stall and want to know which would be best for my setup out of the gears. Stuck on 4.10s or 3.73s since i might spray later on and i dont know if it will run out of speed with the 4.10s. Will getting 3.90s allow me to run nos or not kill me on the highway as bad as 4.10s? This is used as a daily driver since im a student right now and sees about 50/50 highway and city time going from school to work and home. Also what kind of times may i see at the track with new gears? Running 10.2 in the 1/8th right now, 2.73s are KILLING me. Thanks for any suggestions!
    19
    3.73s?
    0%
    8
    4.10s?
    0%
    9
    3.90s?
    0%
    2

  • #2
    4.30
    '95 GT
    I fucked the Olsen twins before they were famous.

    Comment


    • #3
      Does Hone still make an overdrive?

      Comment


      • #4
        3.73 is a 5speed gear. Go 4.10 with auto and don't look back.

        320rwhp. 7.67 @ 90mph 1.7 60'

        DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

        Comment


        • #5
          Btw. You cant make a car for 1/8th mile and expect good highway mpg.

          Just bite the bullet and pay at the pump or go along with it until you have a daily driver.

          320rwhp. 7.67 @ 90mph 1.7 60'

          DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

          Comment


          • #6
            Originally posted by 91CoupeMike View Post
            Btw. You cant make a car for 1/8th mile and expect good highway mpg.

            Just bite the bullet and pay at the pump or go along with it until you have a daily driver.
            Look at you, young grasshopper!!

            Handing down info once given to you.

            Comment


            • #7
              I say split the difference and go 3.90's.

              As posted above, all out performance/lowest ET possible is not condusive to best MPG. You need to figure out what is more important to you at the moment. MPG or ET?
              "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776

              Comment


              • #8
                3.73's

                Comment


                • #9
                  Foe fi sixes

                  Comment


                  • #10
                    What's your top speed on the rev limiter in 3rd gear? Fuel economy is going to suck regardless and I'd imagine you aren't blowing the tires off and hitting the rev limiter in the 1/8, go with the taller gears. You could probably even go to a 4.56 with stock tires and not get anywhere near the rev limiter in 3rd.

                    Handy calculator:
                    This Forum is for discussion of EEC-related subjects.

                    Comment


                    • #11
                      Originally posted by Mysticcobrakilla View Post
                      Foe fi sixes
                      dammit.... beat me
                      i'd go with the tree ni O's
                      first class white trash

                      Comment


                      • #12
                        Originally posted by BlackGT View Post
                        I say split the difference and go 3.90's.

                        As posted above, all out performance/lowest ET possible is not condusive to best MPG. You need to figure out what is more important to you at the moment. MPG or ET?
                        Why meet in the middle?

                        If you're building a drag car, build a drag car.

                        If youre building a street car that is intended for daily use then go that route.

                        I would hate to have the thought in my head "it could have been quicker if I had got..."

                        320rwhp. 7.67 @ 90mph 1.7 60'

                        DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

                        Comment


                        • #13
                          With the ported gt40ps and the e303 which gear set up would you think would be a better fit for the car?

                          Comment


                          • #14
                            Originally posted by umbertorock04 View Post
                            With the ported gt40ps and the e303 which gear set up would you think would be a better fit for the car?
                            id say do what you want who care what people think i have 410s with a 3speed and i hate them!

                            Comment


                            • #15
                              Also keep in mind what your top speed is going to be in 3rd gear, with 4.10s you'd be buzzing it pretty good at 120. Obviously you won't be anywhere near that in the 1/4 with your current mods but throw a serious bottle at it with some good heads and you'd be at it. Gear swaps are cheap compared to the other mods though.

                              Comment

                              Working...
                              X