Best modular shop in DFW area?

[Blackpony]

From the resident road racing guru....don't boost a 4V that you plan to take on track. Stay n/a...build a stroker with good heads and cams and don't destroy all your hard work with the heat associated with boost while on track. They just don't last.

Yes and no. If you have a solid short block, then you will be fine. A centri blower would be ideal as a roots will build a ton of heat and your lap times will be very inconsistent.

Give us a call at the shop, we can take care of you!

[Whiteboy]

A blower is the best bang for a buck

[aggie97]

wth?

By the way...I have had my car for 8 years and been road racing for 5 years. I do all of my own suspension work, but mostly a part swapper. Not one for cracking engines on my own.

From the resident road racing guru....don't boost a 4V that you plan to take on track. Stay n/a...build a stroker with good heads and cams and don't destroy all your hard work with the heat associated with boost while on track. They just don't last.

[SKMCOBRA]

rofl. In before the ptogtfo

wth?

By the way...I have had my car for 8 years and been road racing for 5 years. I do all of my own suspension work, but mostly a part swapper. Not one for cracking engines on my own.

[spederman]

in my experiences, if you want it done right , learn to do it yourself, but if you must take it to a shop, any of the site sponsor shops will help you out.

[FRANCISCO308]

I've seen cars from OKC at HPP Racing in lewisville. Call them 972-395-9844

[mk5.0]

Tons of good shops here, but we need tits before we tell you... (girlfriend, wife, sister , mother..)

[TrueStreetMotorSports.com]

We would be happy to get you taken care of. Give us a call and we can go over your goals


Thanks

[Darren M]

rofl. In before the PTOGTFO

[SKMCOBRA]

I am looknig to either go with a rebuild or install a supercharger on my 1997 Cobra. Looking for about 400rwhp and not confident in a shop up here in OKC. Any recommendations based on actual customer satisfaction for the DFW area?