Poll: 76mm Turbo or Heads/Intake?

[Sam88gta1]

can't say that i blame you! i was especially bored that night (freakin 1.5hr wait in the staging lane by myself and everyone was playing coy since it was "grudge night"
poor brooks can't hide since i know what he and his girl look like!

I was busy with two cars that night and didnt have 5 minutes to spare. I did walk past your car in the lanes 30+ times.

[2165 Turbo Rail]

I'm sure I can get her to cook something

[Sam88gta1]

You never came to help. Maybe I'll get out there Wednesday ( tomorrow is our anniversary so I won't be working on it tomorrow for sure )

I can talk Jill into heading out there on Wednesday with me. Can you talk the wife into cooking us dinner?
Tuesday is bad for me also. League night at the Kart track.

[dville_gt]

You do ask alot of questions. I saw you at the Grudge race but was too busy to answer 100 questions so I didnt stop and say hi.

can't say that i blame you! i was especially bored that night (freakin 1.5hr wait in the staging lane by myself and everyone was playing coy since it was "grudge night"

poor brooks can't hide since i know what he and his girl look like!

[2165 Turbo Rail]

You never came to help. Maybe I'll get out there Wednesday ( tomorrow is our anniversary so I won't be working on it tomorrow for sure )

[dville_gt]

Resolution is the same with the 2 bar. The 2 bar sensor is half the cost of the 3 bar. If you have any questions about the tune dont hesitate to ask. Much like SD there is alot of really bad info out there for you to read.

very appreciated. going to get with vsracing tomorrow and see if he'll cut me a crazy deal if i order a lot of parts from him (turbo, blowoff, wastegate, t4 flange, intercooler, etc.)

[Sam88gta1]

sweet.

i'm starting to feel bad, i think of your 100 post on the new site like 80 have been answering my same questions the 40 different ways i ask them.

you and brooks deserve medals for not choking me to death!

You do ask alot of questions. I saw you at the Grudge race but was too busy to answer 100 questions so I didnt stop and say hi.

[Sam88gta1]

Sam knows his shit so listen to him

Get back to working on the GTO.

[Sam88gta1]

damn you and bringing sound logic into my thread guess i figured the only difference was additional cells in the VE table and if it cost the same amount of credits why not. i was just wondering if the resolution on the 3 bar is less or something. point taken regardless.

Resolution is the same with the 2 bar. The 2 bar sensor is half the cost of the 3 bar. If you have any questions about the tune dont hesitate to ask. Much like SD there is alot of really bad info out there for you to read.

[dville_gt]

All of the ls based motors use the same length pr (7.325) with the exception of the ls7.
The ls9 is part number 12605527. I would say the ls9 is worth 15-20 hp more.

Two Bar sd is much like what you have done in the past. When it comes time to tune it shoot me an email and ill help you with that.

sweet.

i'm starting to feel bad, i think of your 100 post on the new site like 80 have been answering my same questions the 40 different ways i ask them.

you and brooks deserve medals for not choking me to death!

[2165 Turbo Rail]

Sam knows his shit so listen to him

[Sam88gta1]

good to know, are any of these cams on a smaller base circle? i went with 7.425" tsp pushrods that i assume won't work with stock cams (i believe stock is 7.375").

i have a buddy who i think has a ls6 cam that he'd sell me cheap. if not do you have a part number for the ls9 (is it worth any extra hp?)

also, how much harder is tuning going to be vs. what i have currently? i assume it is the same game, logging afr error and modifying the ve table accordingly (obviously with a more aggress PE rate and less timing)?

All of the ls based motors use the same length pr (7.325) with the exception of the ls7.
The ls9 is part number 12605527. I would say the ls9 is worth 15-20 hp more.

Two Bar sd is much like what you have done in the past. When it comes time to tune it shoot me an email and ill help you with that.

[dville_gt]

Throw some fofisixes in that bitch.


Or a B headed mod motor if you really want to go fast.


Lol

got a b headed black 97 cobra sitting the garage that hasn't moved in about a month if ANYTHING happened to that motor you probably already have a real good idea what would be replacing it!

[dville_gt]

Because you have no reason to run a 3 bar sd. This goes back to wanting the s400 because its bigger. No reason to buy something you are not going to use.

damn you and bringing sound logic into my thread guess i figured the only difference was additional cells in the VE table and if it cost the same amount of credits why not. i was just wondering if the resolution on the 3 bar is less or something. point taken regardless.

[Sam88gta1]

why not do the 3 bar sd? does it cost more credits then the 2?

Because you have no reason to run a 3 bar sd. This goes back to wanting the s400 because its bigger. No reason to buy something you are not going to use.