Announcement

Collapse
No announcement yet.

what would you do

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DriveWayBuilt
    replied
    Want to trade long blocks ? Fresh 302 pan to intake. Still at machine shop

    Leave a comment:


  • jyro
    replied
    what balance balancer did you use?

    28 or 50?

    Leave a comment:


  • 91CoupeMike
    replied
    How cheap of a truck daily?

    I'm about to have my explorer going and the day it starts, it's for sale.

    72k miles, 2wd 5 speed 4 door 91' explorer. All new a/c, new radiator, brand new tires.. Thing is clean... CLEAN.. Dipshit blew the motor.. Some I'm putting in another one as we speak.. 12x,xxx miles.. If it doesn't run 100% I won't sell it because I'm cool like that.

    Also open to trades for 4cyl beater car. Or a clean 99/00 civic 4door or hatch. Engine failure? No problem! I happen to have a good sohc vtec.

    Leave a comment:


  • TEAMJACOB
    replied
    Originally posted by 1bad91 View Post
    How much for the longblock? PM me. Thx
    its a 351 stock crank and rods. forged pistons. pro comp aluminum heads, comp cam, 42 lb injectors, 90 mm elbow, 90 mm tb, anderson power pipe, lightning maf, spyder intake. make offer in pm but it has to be enough to buy me a cheap truck daily or enough to put a 302 in so if your offer isnt enough, i wouldnt waste the time.

    Leave a comment:


  • TEAMJACOB
    replied
    Originally posted by FRANCISCO308 View Post
    Why didn't your builder Balance the motor? Have you tried another balancer?
    im not going to go into. more simple to say its my fault. yes on the balancer question.

    Leave a comment:


  • 1bad91
    replied
    How much for the longblock? PM me. Thx

    Leave a comment:


  • FRANCISCO308
    replied
    Why didn't your builder Balance the motor? Have you tried another balancer?

    Leave a comment:


  • TEAMJACOB
    replied
    Originally posted by 91CoupeMike View Post
    Vibration from where?

    Its probably something to do with the balancer or flywheel.

    If you're using a stock style balancer. Throw it in the trash, they are garbage.. I fought with a vibration at higher rpms for a long time.. Bought a summit racing balancer approved to 8,000 rpm and it's smooth as hell. The balancer on there before was a dorman from Autozone, and I returned that pos.
    its a summit sfi balancer. new. the motor wasnt balanced before it was built

    Leave a comment:


  • 91CoupeMike
    replied
    Vibration from where?

    Its probably something to do with the balancer or flywheel.

    If you're using a stock style balancer. Throw it in the trash, they are garbage.. I fought with a vibration at higher rpms for a long time.. Bought a summit racing balancer approved to 8,000 rpm and it's smooth as hell. The balancer on there before was a dorman from Autozone, and I returned that pos.

    Leave a comment:


  • TEAMJACOB
    started a topic what would you do

    what would you do

    my 351w has a vibration in the motor, so ive been told. it has a ton of goodies in it but the fact remains, there is a vibration. if i had the money to have the motor pulled and rebuilt, i would but i dont. i drive the car every day but that vibration shows up in the higher rpms. im tired of having a car i cant have fun in. what would my car be worth as is? should i consider parting? selling off the 351 stuff to fund a 302 or something going in it? im open to suggestions. 91 hatch 351 efi, spyder intake, aluminum heads, t5, 5 lug conv, grey on grey. obviously a whole lot more done to it but i didnt want to list everything if it was necessary
Working...
X