rear end issue brake issue!

[homealone]

Pull the bracket and rotor off and make sure you didn't loose a C clip on the axle.

[rz5.0]

Thanks guys.

Enviado usando mi SHP-L710 usando TapaTalk

[rz5.0]

Swapped out caliper brackets the squeaking stopped. Ill see what it does from here. .

Edit: never mind. Same thing. . Think ill swap a gt 8.8 I have laying around till I figure this out..
Enviado usando mi SHP-L710 usando TapaTalk

[rz5.0]

Ok so I pick the back side on Jack stands. Turned it by hand. It only scrapes half the turn of the wheel. The other half turn it spins freely. . Im guessing it's not any bracket or it would scrape the whole turn of the wheel. . So I guessing maybe bent axle?

Enviado usando mi SHP-L710 usando TapaTalk

[rz5.0]

Swapped a spare axle I had. The squeaking stopped.

Enviado usando mi SHP-L710 usando TapaTalk