Announcement
Collapse
No announcement yet.
LS swap '60 Chevy Sedan Delivery
Collapse
X
-
We just did some minor things today like heater hoses battery cables some wiring issues upper radiator hose stuff like that but I'm going back tonight maybe to finish the wiring harness


Last edited by 2165 Turbo Rail; 03-19-2012, 10:29 AM.
Leave a comment:
-
I promise, when this is done that plug will be the least of your concerns. Wait till we get the SIDE PIPES on lol. Told ya. Keeping this exactly how dad wants it hahaOriginally posted by "MrEd" View Postcool project but god sakes get rid of the expansion plug on the intake and put in a 1"3/8 freeze plug lol....
Last edited by 2165 Turbo Rail; 03-18-2012, 07:59 PM.
Leave a comment:
-
cool project but god sakes get rid of the expansion plug on the intake and put in a 1"3/8 freeze plug lol....
Leave a comment:
-
Lift gate fixed it's not 100% perfect but a damn good job considering

Last edited by 2165 Turbo Rail; 03-19-2012, 10:28 AM.
Leave a comment:
-
I am super proud of my lower radiator hose find. It looks stock I cut off about 6" off of a hose I found at oreilly. No idea what it fits but it was the same shape as the hanger I bent up
Gates part number 21503 (added in case anyone else needs it)

I was going to do rubber hose to the tranny cooler but John suggested hard line. I am glad we went that route it looks way better


Last edited by 2165 Turbo Rail; 03-21-2012, 09:52 PM.
Leave a comment:
-
The car is so dirty that John and I sweep under and around the car every 10 mins or so it seems like

If y'all haven't noticed this is the same body style as John's wagon. Cool coincidence I thought. This is how the car sat back then an dad likes it this high so that's how it's going to stay

(this is WITH the motor in the car)

Keeping with the old car theme we didn't clean up the motor or anything. I think it's cool that it will look like the car has been sittin for 30 years with this motor in it haha





Last edited by 2165 Turbo Rail; 03-19-2012, 10:27 AM.
Leave a comment:
-
Dad wanted to keep it looking like it did back then. It was always primer so he had it painted with some enamel paint that looks like primer. The painted the interior a hot rod flat black




Flat black engine bay too

Last edited by 2165 Turbo Rail; 03-19-2012, 10:27 AM.
Leave a comment:
-




Start of body work ( done by one of my dads customers)




Last edited by 2165 Turbo Rail; 03-19-2012, 10:26 AM.
Leave a comment:
-
Interior in pretty bad shape too and there are a ton of parts just thrown in back




Original AC car you can see the vent on the lower dash and controls in the middle of the dash at the bottom



Showing some of the rust

the bullet hole is real. The story goes that the friend was running from the cops and raising cain going through the fields near their town. The cops shop at the car (I guess to shoot out the tire) and shot the door instead.

Last edited by 2165 Turbo Rail; 03-19-2012, 10:26 AM.
Leave a comment:
-
LS swap '60 Chevy Sedan Delivery
Time to start a thread for dads new project. This one isn't going to be anything like the GTO so don't compare the two haha
This is a car that my dad and his friend used to run around in right after my dad graduated high school. The friend kept the car and for about the last 30 years it sat behind his barn in a tiny town in Kansas. Dad bought it from last year when we took the GTO up there for a "drag Main" day where the old high school grads come back to this little town and drag main. There's also a parade and car show
Here are some pics of it from that weekend and a you can see it has cancer....bad!


Lift gate was smashed in a little on the pass side

Still had an old set of slicks on it



Dad wants it to be "old school" not going to be my style but this is 100% his toy so we are building it to be exactly what he wants
Started off with the slot mag wheels with white letter tires


Last edited by 2165 Turbo Rail; 03-19-2012, 01:26 PM.




Leave a comment: