Originally posted by 91CoupeMike
View Post
Announcement
Collapse
No announcement yet.
91 coupe vs c head cobra with bolt ons.
Collapse
X
-
Originally posted by Badass2000GT View PostI did a cam swap in my coyote engine and I picked up 45 rwhp at 7200 rpm.
What will a cams only mod do vs stock cams?
Leave a comment:
-
Originally posted by 91CoupeMike View PostHow much $ for < 400rwhp?
They do improve power, but not like an ls or small block will pick up.
Leave a comment:
-
Originally posted by JC316 View PostStock Long block Mach 1 with custom grind cams, short runner intake, LT headers and UD pullies.
They do improve power, but not like an ls or small block will pick up.
Leave a comment:
-
Originally posted by 91CoupeMike View PostYeah, but don't people make up a good amount of power with the 96-98 cam swap? Intake cam I think.
To me, that's a lot of work if that is the ONLY thing you plan on doing.
Leave a comment:
-
Originally posted by Badass2000GT View PostOther motors only have one cam. So that's a big difference, but hell doing a proper cam job on a LS1 can get up to the 1500 dollar range or so.
To me, that's a lot of work if that is the ONLY thing you plan on doing.
Leave a comment:
-
Originally posted by 91CoupeMike View PostCompared to other motors?
Leave a comment:
-
Originally posted by Badass2000GT View PostThey'll pickup 35-45 hp N/A for about 1750 dollars. I think that's pretty good to have that power all the time.
Leave a comment:
-
Originally posted by 91CoupeMike View PostCams won't do shit for the $ involved.
Leave a comment:
-
Originally posted by JC316 View PostWhat are the bolt ons for the Cobra? Cams and LT headers really wake the C headed cars up. Not to mention that 3.73's are a bad gear for a Cobra, they really need 4.10s or higher.
Leave a comment:
-
Originally posted by JC316 View PostWhat are the bolt ons for the Cobra? Cams and LT headers really wake the C headed cars up. Not to mention that 3.73's are a bad gear for a Cobra, they really need 4.10s or higher.
Leave a comment:
-
What are the bolt ons for the Cobra? Cams and LT headers really wake the C headed cars up. Not to mention that 3.73's are a bad gear for a Cobra, they really need 4.10s or higher.
Leave a comment:
-
Originally posted by BigTitan21 View PostBaby steps, baby steps. He should race a 4.6 first.
Hmmm, if only there was a stock 4.6 that he could race.........
Leave a comment:
Leave a comment: