Del-Ton AR 15?

[CexMashean]

So, Del-Ton was nice enough to send me two pivot pins, instead of a take down pin.
Where can I buy one locally?

[juiceweezl]

LOL You need the printout to identify all the springs and pins, and then the 2 short Youtube videos that have been posted here many times. Use a razor blade for the one detent spring or it will go flying.

These videos:



[/QUOTE]

[Grimpala]

It's a lego set for grown-ups. Youtube it and put it together.

[CexMashean]

What the fuck am I supposed to do with all of this?
/s

[garycrist]

Runner Runner is a GREAT place that has bent over for me
as well as for everyone I have seen go in there.
Just my 2p

[Grimpala]

I literally put together my first lower with a pocket knife, and Allen Wrench for a punch, and a pair of pliers, your don't need much.

A punch and a razor, like crazie said, is all you need.

When driving in the bolt catch pin, using some tape to protect the finish. It really makes it easier.

QFT. I built mine with a screw driver used for glasses repair and pair of needle nose pliers.

This aint rocket surgery.

Watch some youtubes, put it together and go shooting.

[HarrisonTX]

Kit is coming in earlier than I expected. Should be here Friday.

Haven't bought a single tool yet to put it together.

I literally put together my first lower with a pocket knife, and Allen Wrench for a punch, and a pair of pliers, your don't need much.

A punch and a razor, like crazie said, is all you need.

When driving in the bolt catch pin, using some tape to protect the finish. It really makes it easier.

[KBScobravert]

A razor blade and maybe a punch set is all you need for the lower

I use a even skinnier punch and a clevis pin vs using the razor blade trick. Slide in the 1/4" clevis pin, line up the holes, drop in the spring and brass detent, push down into the receiver with the punch, rotate the clevis as you take out the punch. Take your take down piano push it in as the clevis cones out the other end.

[Craizie]

It's in my original post up top.

A razor blade and maybe a punch set is all you need for the lower

[CexMashean]

what kit did you order?

I assembled with basic hand tools since the upper was already assembled.

It's in my original post up top.

[Pro88LX]

Kit is coming in earlier than I expected. Should be here Friday.

Haven't bought a single tool yet to put it together.

what kit did you order?

I assembled with basic hand tools since the upper was already assembled.

[CexMashean]

Kit is coming in earlier than I expected. Should be here Friday.

Haven't bought a single tool yet to put it together.

[Pro88LX]

http://palmettostatearmory.com/ptac-16-mid-length-5-56-nato-1-7-phosphate-rifle-kit.html

i have the stainless barrel kit from them, was on sale for 379 when i got it

http://palmettostatearmory.com/psa-16-stainless-mid-length-1-7-freedom-rifle-kit.html

[Mach1Run]

I dont know about the webpage but they seem pretty responsive in their thread on the arfcom moetown forum.

[CexMashean]

For those familiar with Runner Runner, is their webpage very relevant and updated with their current stock?