97 Cobra LSx Build Thread

[homealone]

Let me know if you get rid of the truck accessories

If you do get rid of the power steering pump I could use it

I would be interested in the wiring harness too.

[2165 Turbo Rail]

If you do get rid of the power steering pump I could use it

[terror_drone]

Let me know if you get rid of the truck accessories

Sent from my HTC first using Tapatalk

[mystic96]

You'll need f-body or vette accessories to clear the hood. Vette still mounts the alternator up top but not nearly as high as the truck stuff. F-body mounts the alt. at the bottom under the PS pump

[BMCSean]

This build sucks.

[BlueCoupeRedVert]

Not any more! LOL

No worries.. I will make it work and look good.

[Denny]

I am doing PS.

Not any more! LOL

[Cobraman]

Yea bolt it up like Bryan said and since you aren't going to use power steering this works out easily for you

I am doing PS.

[2165 Turbo Rail]

Yea bolt it up like Bryan said and since you aren't going to use power steering this works out easily for you

[Denny]

Cut those spacers a bit longer than you think you need. You can always take it down little by little.

[OrangeChevyII]

I just took off a low mileage Ls3 water pump if you're wanting to switch to car accessories.

[BlueCoupeRedVert]

The alternator will bolt to the block down low driver side. Have to make some spacers to line pulley up but it'll work.

That's what I was hoping it would do..

[OrangeChevyII]

The alternator will bolt to the block down low driver side. Have to make some spacers to line pulley up but it'll work.

[Sleeper]

corvette bracket.

[Cobraman]

Or is the alternator question because it is too high???

Alternator is hitting the hood. It's not going to fit