My SN95 "New Gen" Resto!

[BoostedGT]

Looking great Scott!

[01yz2nv]

Very nice, coming along great!

[onjacks]

[R3_82GT]

Looks awesome!. All I've gotten done is bolted the heads on your old 408 and bought a bunch of parts.

[junk racing]

Nice progress....

[onjacks]

Thanks guys. I think I'm signing up for drag week next sat so hopefully that out a fire under my ass. It's been on my bucket list for a long time. Gives me 5 months to finish.

[BradM]

I wish I had an eighth of your talent.

[Back N Black]

its always fun to see when you update this thread! Top notch work for sure! That car needs to be featured on the cover of a magazine for sure

[KBScobravert]

Great progress. That console came out really nice indeed.

Sent from my SAMSUNG-SM-N900A using Tapatalk

[OreoStang]

Looks damn good for sure

[onjacks]

So far thats pretty much it. New front and rear glass was installed last week, so the outside is almost complete. still need to get some nice hoodpins installed though.

Once the roller is finished its getting shoved into the corner of my garage with a car cover.

Its prob gonna take some time (and $$$$) to build my new Motor & Turbo Kit.

Hopefully my goal of 1200rwhp will be a reality this summer.

Stay Tuned.

[onjacks]

Back to the car.

Got the push/pull battery cutoff mounted. It sticks out a little to far so I will cut it down later. And yes, I polished it.

I built a wiring panel to go in the backseat "hole" which will be covered by a seat delete panel.

I still have to finish the front of the tunnel & shifter mount before wires can go up front. Everything is wired up and ready to plug up.

The trunk panels I just finished tonight turned out great. A little black marine carpet gives it that oem look. I will get some better daylight pics this weekend.

[onjacks]

Most of this stuff is to keep me productive while I save for go fast parts

The car will be completed as a roller before I put the motor and turbokit together. I'd like to just plug up the motor and start it once im finished.

So far Ive managed to get a Dart SHP block, Afr 220 heads,Super victor & A Forged Eagle Crank.


I pretty much fabbed up how I want the kit to be, but Im going to build new headers to accept the 3in bolt pattern of the AFR's

[GrayStangGT]

Damn, that came out nice.

[onjacks]

Knowing I'd never get the center console back in, I decided to get creative.

A little plastic epoxy,Short strand fiberglass & some sanding. Done!

The console fits the tunnel tight and gives me a good sitting spot for my wiring.

I plan to wrap it with some 1/8 foam and black vinyl after mock up of the shifter.

Ordered some seat brackets from Racecraft and bolted in the Kirkey. The shifter will be in the stock spot with a 5 speed boot around it.